Rotrok

Bevel Gearbox

We are leading Manufacturer for the Bevel Gearbox which also includes Multi-Turn Bevel Gearbox & Dsb Twin Shaft Multi-Turn Bevel Gearbox since 2010
Multi-Turn Bevel Gearbox

Multi-Turn%20Bevel%20Gearbox

Rotork Gears Series IB operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised applications.
Torque range up to 10,846 Nm.
Thrust range up to 1,557 kN.
Totally enclosed gearing.
Grease filled for life.
Removable output sleeve.
Input flanges to suit electric actuators.

Dsb Twin Shaft Multi-Turn Bevel Gearbox

Dsb%20Twin%20Shaft%20Multi-Turn%20Bevel%20Gearbox
Complete range of multi turn bevel gearboxes with two shafts for use with dual stem sluice gates and penstocks.
Torque range up to 10,846Nm (8,000 lbsft).
Thrust range up to 1,557KN (350,000 lbs).
11 sizes. Ratios from 2:1 to 120:1
Ductile iron baseplates
Comprehensive gear ratios combined with a selection of spur input reducers
Pinions mounted on ball bearings
IP67
Options for all types of environment , including IP68
Optional position indications.
Optional input shafts available at 90º & 180º to each other.

Hob Hand Operated Bevel Gearbox

Hob%20Hand%20Operated%20Bevel%20Gearbox
Cost effectively designed commodity hand operated bevel gears suited for sluice gates, gate, and globe valves.
Torque range up to 1,355Nm (1,000 lbsft).
Thrust range up to 356KN (80,000 lbs).
4 sizes. Ratios from 2:1 to 6:1
Cast iron body
Maintenance free
Options for all types of environment.
Optional Position indicators.
Optional IP68.

Industrial Gearbox

We are leading Manufacturer for the Industrial Gearbox which also includes Light Duty Qtr-Turn Manual Gearbox & Ab Qtr-Turn Manual Gearbox since 2010
Light Duty Qtr-Turn Manual Gearbox

Light%20Duty%20Qtr-Turn%20Manual%20Gearbox
Light duty pressed stainless steel quarter turn gearboxes suited for pharmaceutical, wash down, and corrosive environments.
Torque range up to 1,000Nm (738 lbsft). 3 sizes.
Ratios from 37:1 to 45:1
304 stainless steel housing and input shaft
Aluminium bronze worm wheel
Light weight
Suitable for corrosive environments
IP65
Removable output drive sleeves

Ab Qtr-Turn Manual Gearbox

Ab%20Qtr-Turn%20Manual%20Gearbox
The AB range of quarter-turn operators have a cast iron housing and are intended for applications in chemical, power, waterworks, HVAC and most general industrial applications.
Cast iron housing (ductile iron optional).
Steel input shaft (Stainless Steel optional).
18 models up to 32,000 Nm output.
Rugged construction.
Axial needle bearings.
Polyurethane coating.
Stroke: 0 to 90º (+/- 5º adjustable).

Mow Qtr-Turn Modulating Gearbox

Mow%20Qtr-Turn%20Modulating%20Gearbox
Heavy duty quarter turn modulating gearboxes suited for control valves.
Torque range up to 47,000Nm (34,500 lbsft). 9 sizes.
Ratios from 40:1 to 2940:1
Up to 1,200 starts per hour
Ground and polished worm shaft
Angular contact bearings

Ilgd Qtr Turn Gearbox

Ilgd%20Qtr%20Turn%20Gearbox
Complete range of manual declutchable sandwich override quarter turn gearboxes for double acting pneumatic actuators.
Torque range up to 17,000 Nm (13,000 lbsft).
7 sizes. Ratios from 35:1 to 468:1
Plated input shaft
Cast iron housing
Axial needle bearing
Optional high and low temperature.
Optional ISO drive coupling.
Optional Solenoid valve to evacuate air automatically.
Optional IP67

Ilgs Qtr Turn Gearbox

Ilgs%20Qtr%20Turn%20Gearbox
Complete range of sandwich manual override quarter turn gearboxes for spring return pneumatic actuators.
Torque range up to 32,000Nm (23,600 lbsft).
7 sizes.
Ratios from 34:1 to 705:1
Optional high and low temperature
Optional ISO drive coupling

Wgs Heavy Duty Subsea Gearbox

Wgs%20Heavy%20Duty%20Subsea%20Gearbox
The WGS range of quarter-turn operators are designed for heavy-duty subsea applications at any depth with carefully chosen materials to offer the highest level of reliability required in this very harsh environment.
The operators are equipped with membrane or piston type pressure compensators to balance the pressure and allow them to work at any depth.
Worm shaft supported on taper roller bearings.
High strength alloy steel worm screw hardened and ground.
Vertical or horizontal carbon steel ROV input (class 1 to 7).
Torque range up to 500,000 Nm.
Stroke 0 to 90° (+/- 5° adjustable).

Is Motorised Multi-Turn Spur Gearbox

Is%20Motorised%20Multi-Turn%20Spur%20Gearbox
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised applications.
Torque range up to 46,100 Nm.
Thrust range up to 4,350 KN.

Rab Radial Acceptance Gearbox

Rab%20Radial%20Acceptance%20Gearbox
The Radial Acceptance Bevel is suitable for AWWA and where side load movement is likely to happen on penstocks or gate valves.
Torque range up to 678Nm (500 lbsft).
Thrust range up to 178KN (40,000 lbs).
2 sizes.
Ratios from 2:1 to 6:1
Comprehensive gear ratios combined with a selection of input reducers
Removable drive sleeves designed to accommodate for heat build-up
Tapered roller bearing to withstand side loading
IP68

Worm Gearbox

We are leading Manufacturer for the Worm Gearbox which also includes Motorised Worm Gearbox & Manual Worm Gearbox since 2010
Motorised Worm Gearbox

Motorised%20Worm%20Gearbox

The IW range of quadrant wormgear valve operators is available in manual and motorised configurations and features a removable sleeve to facilitate bore and keyway machining. This sleeve can be rotated in steps to facilitate mounting to the valve.
IW size 3 to 13 torque range up to 264,000 Nm.
IW size 14 to 17 torque range from 250,000 Nm to 850,000 Nm.
Worm shaft supported by angular contact bearing.
High efficiency and multiple ratios.
Removable drive sleeves up to IW11.

Manual Worm Gearbox

Manual%20Worm%20Gearbox
The 232 range of quarter-turn operators have a dye cast aluminium housing and are intended for applications in power waterworks and gas pipelines, HVAC, fire protection and most general industrial applications.
Lightweight design.
Dye cast aluminium housing.
Plated input shaft.
7 models up to 1500 Nm.
Removable drive sleeve.
2 keyways to cater for 45° & 90° positions.

Turn Worm Gearbox

Turn%20Worm%20Gearbox
Multi turn worm gearboxes used for applications such as sluice gates and dampers.
Torque range up to 162,000 Nm (119,000 lbsft).
11 sizes.
Ratios from 40:1 to 5760:1
Angular contact bearings supporting worm shaft
Optional travelling nut for applications requiring mechanical stops
Optional lever arms, AWWA

Pneumatic Actuators

We are leading Manufacturer for the Pneumatic Actuators which also includes Cp Compact Pneumatic Actuator & Scotch Yoke Pneumatic Actuator since 2010
Cp Compact Pneumatic Actuator

Cp%20Compact%20Pneumatic%20Actuator

CP range pneumatic actuators are a versatile, modular, scotch yoke design available in both double-acting and spring-return configurations. The compact and efficient design yields high torques even at low pressures. The design concepts found in Rotork’s large, heavy-duty actuators has been applied to the CP range, which brings heavy-duty actuator qualities to small, quarter-turn actuators.
The actuator body is of rugged, ductile cast iron available in four body sizes. Cylinders are manufactured from carbon steel, electroless nickel-plated.
Pneumatic actuators in double-acting and spring-return configurations.
Corrosion resistant cylinders.
Actuators certified to IP 66M/67M.
Actuators certified to ATEX 94/9/EC.
Actuators certified in accordance with PED 93/27/EC.
Torque output to 4,500 Nm (39,800 lbf-in).

Scotch Yoke Pneumatic Actuator

Scotch%20Yoke%20Pneumatic%20Actuator
The Remote Control range is a family of valve actuators and associated products of the former Remote Controls AB of Sweden. These outstanding products are now backed by the vast global sales and service network of Rotork. Details of the product range are available from the links below and the menu on the left.
RC200 / RCI200 Compact Pneumatic Scotch Yoke Actuator.
RCC200 Pneumatic Quarter Turn Actuator
RCC200 Firesafe Firesafe Pneumatic Quarter Turn Actuator
RC88 High Torque Compact Pneumatic Quarter Turn Actuator
RCR Pneumatic Actuator – Rotary Motion between 0-180°
RC200-DOS Pneumatic Quarter Turn Dosing Actuator
Twin Power Robust multi-turn actuator suitable for use with rising stem or rising wheel valves
RCT200 Pneumatic Quarter Turn Actuator For Corrosive Environments
RC200-M1 Manual Override M1

Large Pneumatic Actuator

Large%20Pneumatic%20Actuator
GP (pneumatic) and GH (hydraulic) range scotch yoke actuators are designed to provide a rotary, quarter-turn movement for either on/off or modulating duty. The rugged yet compact design is available with two different yoke designs. The classic symmetric yoke delivers peak torque at both ends of stroke. Alternatively, they can be supplied with canted torque arms designed to deliver peak torque at only one end of stroke. Use of canted arms can often reduce actuator size, weight and cost for valves with appropriate torque demand characteristics.
Pneumatic and hydraulic actuators in double-acting and spring-return configurations.
Suitable for use in SIL2 and SIL3 rated safety systems.
Certified to IP 66M/67M.
Certified to ATEX 94/9/EC.
Certified in accordance with PED 93/27/EC.
Torque output to 600,000 Nm (5,000,000 lbf-in).
P (pneumatic) and H (hydraulic) ranges actuators are designed to provide a rotary, quarter-turn movement for either on/off or modulating duty. The robust design incorporates double sealing for superior environmental protection and features a one-piece ductile iron cast centrebody. Superior design features enable a much longer service life than competitive products. P and H range actuators are capable of a least 200,000 cycles under full load.
Pneumatic torque output up to 88,000 lbf-in (9,942 Nm).
Hydraulic torque output up to 95,425 lbf-in (10,780 Nm).
Steel and ductile iron construction.
Inherently safe, factory welded spring-return module.
Exclusive Rotork double ‘O’ ring sealing for proven protection against leakage in oil-filled service.
Special build available for nuclear power plant safety related valve applications class 1E, in standard IEEE323.
AWWA C540 compliant build available.

Lp Linear Pneumatic Actuator

Lp%20Linear%20Pneumatic%20Actuator
Rotork linear actuators offer the advantages of compact size, high performance and a simple but highly reliable design. They are ideal for operating on/off and control functions of both globe and wedge gate valves. Both spring-return and double-acting configurations are available with either pneumatic or hydraulic cylinders.
Rotork Fluid Systems’ Centres of Excellence will guide you in properly determining and meeting your linear actuator needs.
Electroless nickel-plated cylinders, chromium-plated piston rods.
Hammer blow and standard valve stem coupling designs available.
Thrust up to 5,500,000 N (1,236,000 lbf).

Rotary Actuators

We are leading Manufacturer for the Rotary Actuators which also includes Heavy Duty Rotary Actuator & Rotary Actuator since 2010
Heavy Duty Rotary Actuator

Heavy%20Duty%20Rotary%20Actuator

Torques from 50 to 200 ft.lb. (67 to 271 Nm).
90 to 120 degrees rotation.
Modulating Duty: 2,000 starts per hour.
Manual override standard.
Automatic torque limiting.
Self-locking drive system to hold in last position and prevent backdriving up to thrust rating.
AC input power (single and three phase) or DC input power versions.
Temperature range from -40° F to 185° F (-40° C to 85° C).

Rotary Actuator

Rotary%20Actuator
Torques up to 350 in. lb. (40 Nm).
Rotation: 10 degrees to 20 turns.
Continuous unrestricted modulating duty.
Manual override.
Self-locking drive system to hold in last position and prevent backdriving up to torque rating.
AC input power (single phase) or DC input power versions.
Temperature range from -40° F to 150° F (-40° C to 65° C).
Torques from 3.5 to 400 in. lb.(0.4 to 45.2 Nm).
40 degrees to 60 turns (SM-1100) rotation
72 degrees to 324 turns (SM-1500) rotation.
Manual override option.
Torques from150 to 12,500 ft. lb.(203 to 16950 Nm).
33 to 90 degrees rotation.
AC input power (single and three phase).
Torques from 370 to 26,000 ft.lb.(271 to 35,256 Nm).
90 to 313 degrees rotation.
HART, Profibus & Foundation Fieldbus available.
Self-locking drive system to hold in last position and prevent backdriving up to 125% of torque rating

Linear Actuators

We are leading Manufacturer for the Linear Actuators which also includes Heavy Duty Linear Actuator & Linear Actuator since 2010

Heavy Duty Linear Actuator

Heavy%20Duty%20Linear%20Actuator
Thrusts from 800 to 1,600 lbf. (3,558 to 7,117 N).
Stroke distance from 6 to 24 inches (152 to 610 mm).
Modulating Duty: 2,000 starts per hour (indoor/outdoor).
HART available.
Automatic thrust limiting.
Anti-condensation heater and thermostat.
Thrusts from 150 to 1,500 lbf. (667 to 6,672 N).

Linear Actuator

Linear%20Actuator
MV-1000: Up to 200 lbf. (890 N) thrust
VA-1000: 220 to 900 lbf. (979 to 4003 N) thrust
MV-1000: Up to 1.375 inches (35mm) linear travel
VA-1000: Up to 1.5 inches (38.1mm) linear travel
Thrusts from 300 to 3,000 lbf. (1,334 to 13,345 N).
Stroke distance from 0.25 to 4 inches (6.4 to 101.6 mm).

Industrial Actuators

We are leading Manufacturer for the Industrial Actuators which also includes A Range Multi-Turn Actuator(A & Awt) & Na Actuator For Nuclear Powerplants since 2010
A Range Multi-Turn Actuator(A & Awt)

A%20Range%20Multi-

Turn%20Actuator%28A%20%26%20Awt%29
The A/AWT range combines the qualities of a robust electric motor and a well proven simple mechanical drive. Total environmental sealing to IP68 allows the inclusion of integral motor starter and control electronics.
Torque range 14 to 3,000 Nm (10 to 2,200 lbf-ft) direct drive, up to 250,000 Nm (185,000 lbf-ft) quarter-turn and up to 40,800 Nm (30,000 lbf-ft) multi-turn (rotary).
Oil bath lubricated IP68 double-sealed option.
Complete integral motor control or customer supplied motor control.
Isolating and regulating duty.
Separate motor control available where required (syncroset actuator).

Na Actuator For Nuclear Powerplants

Na%20Actuator%20For%20Nuclear%20Powerplants
Rotork NA range actuators have been qualified for safety related duty in nuclear reactor installations. The qualification is in accordance with US standard IEEE 382, 1980.
Rotork type NA actuators have been manufactured in strict accordance with the latest quality procedures for use in nuclear environments.
Total environmental sealing.
Designed for active and passive duty.
Torque limiter brake options.
Thrust compensator options.
Inside and outside containment capability.

Q Compact Quarter-Turn Actuator

Q%20Compact%20Quarter-Turn%20Actuator
The Q range is a single-phase quarter-turn direct drive electric actuator available in two versions, both environmentally sealed to IP68. Q standard for simple open/close duties where on/off control is required and the Q Pak which incorporates a specially designed control interface module enabling operation from a variety of remote control signals.
Torque range 30 to 406 Nm (22 to 300 lbf-ft).
Rugged compact, double-sealed.
Positive travel limitation through externally adjustable mechanical stops.
Marine option.
Simple remote control for basic applications.

Gpsa Electric Control Valve Actuator

Gpsa%20Electric%20Control%20Valve%20Actuator
The GPSA is a low thrust, high precision linear actuator designed for use in chemical dosing and other process control applications where continuous modulation and tight accuracy are required.
Thrust range up to 890 N (200lbf).
Stroke distance up to 35mm (1.375″)
Continuous unrestricted modulating duty
HART, Profibus and Foundation Fieldbus available
Temperature range from -20ºC to 65ºC (-4ºF to 150ºF)
Automatic thrust limiting available
Self locking drive system to hold in last position and prevent backdriving up to thrust rating
Manual override as standard.
Integral PI (Proportional & Integral) control.
Adjustable speed.
Output characterization.
Password protection.
Non-intrusive setup and calibration.
AC input power (single phase).

Rom Compact Quarter-Turn Actuator

Rom%20Compact%20Quarter-Turn%20Actuator
ROM actuators provide quiet and reliable operation for all kinds of small ball valves and butterfly valves, as well as dampers and ventilation louvres. They provide self-locking as standard, local visual indicators and manual override options together with a wide range of voltages.
Torque range 35 to 650 Nm (25 to 480 lbf-ft).
Efficient yet simple gearing.
Wide range of supply voltages available.
Single-phase, three-phase and DC options.
Watertight IP67 rating.

Go Gas-Over-Oil-Actuator

Go%20Gas-Over-Oil-Actuator
The GO range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust GH and RH quarter-turn prime movers and are field proven in installations around the world. Control configurations are available to meet virtually any operational requirements.
Scotch yoke and rack & pinion double-acting actuators.
Low- or high-pressure control logic options.
ASME certified tanks.
Hydraulic manual override standard.
Speed control in both directions standard.
PED or ASME approved gas/oil and power gas storage tanks.

Hpg High-Pressure-Gas Actuator

Hpg%20High-Pressure-Gas%20Actuator
The HPG range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust scotch yoke mechanism field proven the world over in all types of fluid power applications.
Manual override is a standard feature of the range. Our design incorporates a separate cylinder for hydraulic override to ensure complete separation of high-pressure pipeline gas from the hydraulic fluid. The use of an independent override cylinder allows replacement of power cylinder seals without removal of the actuator from the valve and will even allow for manual operation while the power cylinder is disassembled. Control configurations are available to meet virtually any operation requirements.
Scotch yoke actuators in double-acting and spring-return configurations.

Twin Power Multi-Turn Actuator

Twin%20Power%20Multi-Turn%20Actuator
The Twin Power is a robust multi-turn actuator suitable for use with rising stem or rising wheel valves. Its modular design is available in both pneumatic and hydraulic powered variants.
Torque output to 800 Nm (7,080 lbf-in).
Easily retrofitted to existing valves.
ATEX certified.
Robust cast iron housing.
Increased start torque in the end positions.
Electric position indication (pneumatic optional).

Iq Intelligent Multi-Turn Actuator

Iq%20Intelligent%20Multi-Turn%20Actuator
Provides intelligent communication options and a multilingual display. The IQ actuator range offers multi-turn (rotary) and quarter-turn isolating/regulating duty.
Torque range 14 to 3,000 Nm (10 to 2,200 lbf-ft) direct drive (multi-turn only). Higher torques when combined with IS or IB gearbox, up to 40,800 Nm (30,000 lbf-ft). Quarter-turn when combined with IW gearbox up to 250,000 Nm (185,000 lbf-ft).
Complete integrated motor control.
Simple non-intrusive, infra-red setup and adjustment.
Digital, analogue or bus system remote control and status reporting.
Comprehensive software tools for plant records and valve performance analysis.

Iqt Intelligent Quarter-Turn Actuator

Iqt%20Intelligent%20Quarter-Turn%20Actuator
For quarter-turn applications the IQT is designed for direct drive, and can be mounted at any operating angle. The rugged construction is double-sealed to prevent water and dust ingress even during site wiring.
Torque range 50 to 2,000 Nm (36 to 1,475 lbf-ft).
Available for three-phase, single-phase or DC supplies.
Variable output speed.
Multiport controller option.
Secure self-locking output for butterfly valves and dampers without the use of additional brakes.

Pneumatic Equipment

We are leading Manufacturer for the Pneumatic Equipment which also includes Subsea Hydraulic Actuator & Dh Hydraulic Damper since 2010
Subsea Hydraulic Actuator

Subsea%20Hydraulic%20Actuator

We are well versed with supplying subsea product to meet the harsh conditions and stringent demands of subsea applications. The subsea product range encompasses actuator and gearbox designs for retrievable and non-retrievable applications. Our engineering group works closely with contractor and end-user engineers to meet specific project requirements.
Hydraulic quarter-turn and linear subsea actuators in double-acting and spring-return configurations.
Subsea & splashzone trims.
Retrievable and non-retrievable designs.
Multitude of design options available.
Installed base dating back to 1992 at depths over 2,500 metres.

Dh Hydraulic Damper

Dh%20Hydraulic%20Damper
The DH range of quarter-turn hydraulic vane dampers are engineered to provide a simple, reliable solution to inherent problems often seen in swing check valve applications: namely down line surges from rapid disc reseating and excessive valve wear due to the disc flutter produced at some flow rates.
The rugged design features a self-contained hydraulic system that incorporates an easily adjusted valve for simple yet precise throttling controlin both directions. This closed loop hydraulic circuit protects the valve from potential valve contamination.
Environmental protection: IP 6X.
Temperature class: T5 (-20° to 100°C).
Visual position indication.

Hydraulic Equipments

We are leading Manufacturer for the Hydraulic Equipments which also includes Power Handwheel Valve Operator(Phw) & Rh Hydraulic Rack & Pinion since 2010
Power Handwheel Valve Operator(Phw)

Power%20Handwheel%20Valve%20Operator%28Phw%29

Rotork Fluid Systems’ PHW is a versatile valve operator designed to operate either as a manual handwheel or hydraulically via an external hydraulic power unit connected to the quick-connect fittings provided. It is an excellent solution for seldom used or remotely located valves where automated actuation is not practical but faster valve operation is sometimes required than can be accomplished with a strictly manual handwheel.
Manual or hydraulic operation.
Quarter-turn or rising stem applications.
Auto disengaged handwheel for safety.
Lockable engagement lever prevents unauthorised use.
Torque output to 196 Nm ( 1,735 lbf-in).

Rh Hydraulic Rack & Pinion

Rh%20Hydraulic%20Rack%20%26%20%20Pinion
Rack and pinion actuators often offer the most economical solution for quarter-turn valves that have a fairly constant torque requirement throughout the stroke.
RH (hydraulic) actuators are available in five body sizes to produce torque output up to 3,400 Nm (30,000 lbf-in) at operating pressures up to 250 bar (3,600 psi). They are available in either double-acting or spring-return configurations.
Heavy-duty cast iron bodies.
Electroless nickel-plated cylinders for corrosion resistance.
Nickel-plated, anti-blowout pinion.
Valve mounting dimensions per ISO 5211 DIN 3337.

Si Electro-Hydraulic Failsafe(Skilmatic)

Si%20Electro-Hydraulic%20Failsafe%28Skilmatic%29
The Skilmatic range is a self-contained electro-hydraulic valve actuation solution available for both quarter-turn and linear applications. The actuators incorporate sophisticated electronics that provide non-intrusive set-up and interrogation via an infra-red hand held remote. They are suitable for on/off, modulating and emergency shutdown duties in applications up to SIL 3.
Linear thrust output 1.7 to 5500kN.
Quarter-turn torque output 65 to 600,000Nm.
Single-, three-phase or 24VDC power supply options.
Non-intrusive infrared setting & configuration.
LCD display for position, pressure, diagnostics and fault indication.
Optional bus communications via all major protocols.
Partial stroke test capability.
Watertight or explosionproof.
Double-sealed terminal compartment.
ATEX, FM, CSA, IEC and GOST certified.

Svm (Smart Valve Monitor)

Svm%20%28Smart%20Valve%20Monitor%29
The SVM (Smart Valve Monitor) is a sophisticated partial stroke testing system for both pneumatic and hydraulically actuated on/off valves. Although primarily used on shutdown valves, the system is also suitable for blow-down, subsea, HIPPS and process shutdown applications. There are design variants for both hazardous and safe area installation.
Comprehensive valve performance monitoring system.
Partial stroke testing in real time.
Tests all final elements as required by EIC 61508.
Compatible with virtually any fluid power actuator.
Assists with SIL compliance — extends shutdown intervals.
Completely transparent to normal valve operation.
Facilitates strategic maintenance.
Suitable for use through SIL 4.

Ib-Is Bevel And Spur Combinations

Ib-Is%20Bevel%20And%20Spur%20Combinations
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised applications.
Manual Torque range up to 10,846 Nm
Manual Thrust range up to 1,557 kN
Motorised Torque range up to 8.135Nm
Motorised Thrust range up to 1,320 kN
Totally enclosed gearing
Grease filled for life
Removable output sleeve
Input flanges to suit electric actuators

Twin Input Hand Operated Gearbox

Twin%20Input%20Hand%20Operated%20Gearbox
Hand operated combination bevel and spur gearboxes for high and low speeds of operation.
The twin input shaft option can be supplied with the IS range, and with the AS (Auxiliary) range, combined with a bevel gearbox as shown.

Dsir Dual Speed Input Reducer

Dsir%20Dual%20Speed%20Input%20Reducer
Dual Speed Input Reducer
Reduces operating time for manual gearboxes
Can be used with any manual gearbox with an input flange of F14 or FA14
Two ratios 1:1 and 4.25:1

Complete Range Of Steel Mounting Kits

Complete%20Range%20Of%20Steel%20Mounting%20Kits
A complete range of stainless steel or carbon steel mounting kits, engineered from certified material, individually bagged and labelled ready for assembly.
Alternative materials, custom design, material certification, logo or brand names are available as options
Complete kits for valves from 1/4” – 48”
F03 – F35 Mounting flange – ISO 5211/DIN 3337
Open or closed construction
Manufactured in stainless steel
Designed, manufactured, and delivered in days
CNC precision machined
3 year guarantee, free from manufacturing defects

Quarter Turn Valve Adaption

Quarter%20Turn%20Valve%20Adaption
Quarter turn valve adaption for rack and pinion or pneumatic actuators can be provided in the form of spool or pedestal type mounting kits. These are fully enclosed adaptors with options of DD, square or keyed drives.
Construction materials will be carbon steel, supplied complete with fasteners, painted or natural.
Valves from 1/4” to 48”
F03 – F35 Flanges – ISO 5211/DIN 3337
Welded to ASME 9 standards
Square, key of double D drive
100 – 500mm in length
Optional O ring seals, stress calculations, material certification
Fire Protection Systems
We are leading Manufacturer for the Fire Protection Systems which also includes Fire Protection Systems And Solutions since 2010
Fire Protection Systems And Solutions

Fire%20Protection%20Systems%20And%20Solutions
Rotork has the experience, know-how and product range to deliver virtually any actuation solution. Rotork products have long been chosen for their reliability and performance. Whilst these proven characteristics are certain under normal operating conditions, there are conditions that not even a standard Rotork actuator can operate in — fire.
Fire and explosion is a major cause of concern to refinery, gas processing, petro-chemical and offshore installations. Danger and damage from fire can be minimised by the efficient and effective protection of the systems, which control the plant.
For this reason Rotork can recommend a range of fire proofing options for it’s actuators, ranging from fixed passive protection through to full fire retardant enclosures.