Best PLC Course in Dhaka Bangladesh
We are providing Best PLC Course in Dhaka Bangladesh
Industrial automation and process control systems extensively use programmable logic controllers or programmable controller (PLC).
A PLC is a digital computer used for automation of industrial processes, like controlling machinery or factory assembly lines. Unlike desktop computers, PLCs are have multiple inputs and outputs, operate under extended temperature ranges, have immunity to electrical noise, and have resistance to vibration and impact. Programs to control machine operation are usually stored in battery-backed or non-volatile memory.
So recommend to find a course like plc course in dhakla
The main difference from other computers is that PLCs operate in industrial environments (dust, moisture, heat, cold) and have multiple input/output (I/O) terminals. I/O terminals connect the PLC to sensors and actuators. PLCs measure, analog process variables (such as temperature and pressure), and values from positioning and vision systems. PLCs outputs operate electric motors, pneumatic or hydraulic cylinders, relays or solenoids, and analog outputs. Input/outputs are built into a micro PLCs, and on modular PLCs external I/O modules are attached to a base or chassis. Ethernet computer networks plug directly into most PLCs.
PLCs were invented as replacements for automated systems that would use hundreds or thousands of relays, cam timers, and drum sequencers. Often, a single PLC can be programmed to replace thousands of relays. Programmable controllers were initially adopted by the automotive manufacturing industry, where software revision replaced the re-wiring of hard-wired control panels when production models changed.
Go to google Serach “PLC Course in dhaka”
Many of the earliest PLCs expressed all decision making logic in simple ladder logic which appeared similar to electrical schematic diagrams. The electricians were able to trace out circuit problems with schematic diagrams using ladder logic. This program notation was chosen to reduce training demands for the existing technicians. Other early PLCs used a form of instruction list programming, based on a stack-based logic solver.
The functionality of the PLC has evolved over the years to include sequential relay control, motion control, process control, distributed control systems and networking. The data handling, storage, processing power and communication capabilities of some modern PLCs are approximately equivalent to desktop computers. PLC-like programming combined with remote I/O hardware, allow a general-purpose desktop computer to overlap some PLCs in certain applications
Training Course on Programming of PLC for Industrial Automation, Maintenance and Troubleshooting of PLC System (66th Batch) 03-12-2014 Details
Introduction to Building Construction Regulations and Bangladesh National Building Code (BNBC) (18th Batch) 24-12-2014 Details
Training Course on Electrical Services for Buildings and Industries. (26th Batch) 28-12-2014 Details
Training Course on Computer Aided Analysis and Design of Civil Engineering Structures using STAAD. Pro Software (31th Batch) 09-03-2015 Details
Training Course on Instrumentation and Control Engineering (02 Batch) 01-01-2015 Details
Training Course on Design and Construction of Earthquake Resistant Structures (Jointly organized by ESCB and Bangladesh Earthquake Society) (7th Batch). 04-01-2015 Details
Training Course on Computer Aided Analysis and Design of Buildings & Foundation and Slab using ETABS and SAFE software together.(28th Batch) 09-03-2015 Details
Training Course on AC INVERTER DRIVES (8th Batch). 06-01-2015 Details
Training Course on Plumbing Technology (27th Batch) 09-03-2015 Details
Training Course on Programming of PLC for Industrial Automation, Maintenance and Troubleshooting of PLC System (68th Batch) 11-03-2015 Details
Training Course on Electrical Machines Operation, Maintenance & Trouble Shooting. (3rd Batch) 11-01-2015 Details
Training Course on Occupational Safety, Health & Environment Management (28th Batch) 13-01-2015 Details
Training Course on Project Management using Primavera. (14th Batch) 14-01-2015 Details
Training Course on Captive Power Generation. (5th Batch) 18-01-2015 Details
Training Course on Fire Fighting System (FFS), Fire Detection System (FDS) & Fire Safety Assessment (FSA) (02nd Batch) 21-01-2015 Details
Training Course on Microcontroller (26th Batch). 24-01-2015 Details
Training Course on Pile Foundation: Design and Construction. (02nd Batch) 25-01-2015 Details
Training Course on HVAC (Refrigeration and Air Conditioning). (10th Batch) 27-01-2015 Details
Training Course on Fire Safety in Buildings (9th Batch). 31-01-2015 Details
Training Course on Computer Aided Project Management (34th Batch)