Rockwell Hardness Tester
With our expertise in this domain, we are able to offer a superior quality range of Rockwell Hardness Tester. This range is applicable in different areas like schools, laboratories, tool-rooms, inspection, heat treatment department, factories and allied fronts. These products are developed using the high-grade components and are tested thoroughly on well set quality parameters.
Manual Rockwell Hardness Tester
Manual Rockwell Hardness TesterClick to
RAB-1
We are among the top most Manufacturers and suppliers of Manual Rockwell Hardness Tester. They provide the facility of Automatic load selection with automatic zero setting dial gauges. Also they provide the Facility for Brinell tests with 187.5 kg load with 2.5 mm Ball indenter, additional load 250 kg with 5 mm Ball indenter for testing hardness of non-ferrous metals.
Technical Specifications:
Model Unit RAB-1
Loads kgf 60, 100, 150, 187.5, 250
Initial Load kgf 10
Max. Test Height mm 230
Depth of Throat mm 133
Max. depth of elevating screw below base mm 240
Size of base mm 170 x 430
Machine Height mm 655
Net Weight kg 65
Standard Accessories
Model RAB-1
Testing table 50mm dia 1 pc.
Testing Table 38mm dia with ‘V’ groove for round jobs 6 to 45mm dia. 1 pc.
Diamond Indenter 120o 1 pc.
Stell ball indenter 1/16″ 1 pc.
Test Block Rockwell ‘C’ 1 pc.
Test Block Rockwell ‘B’ 1 pc.
Test Block Rockwell Superficial ‘N’ NIL
Allen Spanners 5 pcs
Clamping Device 1 pc.
Dash Pot Oil 1 Book
Rubber bellow for elevating screw protection 1 pc.
Instruction Manual 1 Book
Brinell Microscope 1 pc.
Steel Ball Indenter 2.5mm 1 pc.
Test Block HB 2.5/187.5 1 pc.
Steel Ball Indenter 5mm 1 pc.
Ask for Price
RASN
We are engaged in manufacturing and supplying of Manual Rockwell Hardness Tester (RASN). They are fabricated using high grade components. Manual Rockwell Hardness Tester (RASN) is motorized model. They allow Semi automatic operation for production testing. Drive motor single phase 230 V 50 Cycles.
Model Unit RASN
Loads kgf 60, 100, 150
Max. Test Height mm 330
Depth of Throat mm 150
Max. depth of elevating screw below base mm 355
Size of base mm 210×474
Machine Height mm 850
Net Weight kg 100
Standard Accessories:
Model RAB
Steel ball indenter 1/16″ 1 pc.
Brinell Microscope NIL
Steel Ball Indenter 2.5mm NIL
Test Block HB 2.5/187.5 NIL
Steel Ball Indenter 5mm NIL
Rockwell Cum Brinell Hardness Tester
Rockwell Cum Brinell Hardness TesterClick to
RAB-250
We are one of the prime Manufacturers and Suppliers of Rockwell cum Brinell Hardness Tester ( RAB-250 ). They are manufactured using high grade components. They are similar to ‘RAB-250’ but are of bigger capacity. Diamond holder is guided in a ball cage, which enables testing of small pins having diameter less than 6 mm (up to 3 mm diameter.)
Model Unit RAB-250
Model RAB-250
Diamond Indentor 120o 1 pc.
Stell ball indentor 1/16″ 1 pc.
Rockwell Cum Superficial Hardness Tester
Rockwell Cum Superficial Hardness TesterClick to
TWIN
We are well known in the market for Manufacturing and supplying Rockwell cum Rockwell Superficial Hardness Tester ( TWIN ). This Rockwell cum Rockwell Superficial Hardness Tester ( TWIN ) is manufactured with latest technology. They offer the facility of Automatic load selection with automatic zero setting dial gauges. They are operated manually. They are guided with a Diamond holder is in a ball cage, which enables testing of small pins having diameter Less than 6 mm (up to 3mm diameter).
Technical Specifications:
Model
Unit
TWIN
Loads
kgf
15, 30, 45 (Superficial)
60, 100, 150 (Rockwell)
Initial Load
3 (Superficial)
10 (Rockwell)
Max. Test Height
mm
330
Depth of Throat
150
Max. depth of elevating screw below base
355
Size of base
210×474
Machine Height
850
Net Weight
kg
100
Testing table 50mm dia
1 pc.
Testing Table 38mm dia with ‘V’ groove for round jobs 6 to 45mm dia.
Diamond Indenter 120o
Steel ball indenter 1/16″
Test Block Rockwell ‘C’
Test Block Rockwell ‘B’
Test Block Rockwell Superficial ‘N’
Allen Spanners
5 pcs
Clamping Device
Dash Pot Oil
1 Book
Rubber bellow for elevating screw protection
Instruction Manual
Brinell Microscope
NIL
Steel Ball Indenter 2.5mm
Test Block HB 2.5/187.5
Steel Ball Indenter 5mm
Rockwell System Hardness Tester
Rockwell System Hardness TesterClick to
RAS-N
Model : RASN
• Suitable for Rockwell Tests.
• Manually Operated.
• Preliminary Test Force – 98.07 N (10kgf).
• Additional Test Force – 490.3, 882.6, 1373N (50.90, 140 kgf).
• Total Test Force – 588.4, 980.7, 1471N (60, 100, 150 kgf).
• Test Force Selection by external dialing.
• Auto zero setting dial gauge.
Rockwell cum Brinell Tester, Model RASN (B)
• Same as RASN above in additional
• Additional Test Force – 1471, 2354N (177.5, 240 kgf)
• Total Test Force – 1839, 2452N (187.5, 250 kgf)
‘FIE’ new ‘RASN’ series of Hardness Testing Machines come with much improved design and look with following major design changes.
1) The machine body is having a taper front look and a big size dial gauge in the front. The machine is powder coated for far better look. The paint shade do not fade and machine looks like new over year.
2) The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is returned for years together due to hardened bush.
3) A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
4) An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enable testing of small dia. pin or ball upto 3 mm dia.
5) All machine models are provided with automatic zero setting dial gauge or digital readout. Hence zero setting at every test is avoided.
6) Our Hardness Tester confirm to respective standard as under.
IS : 3804, BS 10109-2 & ASTM E-18 for Rockwell Test.
Rockwell Cum Rockwell Superficial Hardness Tester
Rockwell Cum Rockwell Superficial Hardness TesterClick to
RASN-T
Rockwell Cum Rockwell Superficial Hardness Tester
Model : RASN ( T )
• Suitable for Rockwell & Rockwell Superficial Tests.
• Preliminary Test Force – 29.42, 98.07N (3, 10kgf).
• Additional Test Force – 177.7, 264.8, 411.9, 490.3, 882.6, 1373N (12, 27, 42, 50, 90 & 140 kgf).
• Total Test Force – 147.1, 294.2, 441.3, 588.4, 980.7, 1471N (15, 30, 45, 60,100,150 kgf).
IS : 5073, BS 10189-2 & ASTM E-18 for Rockwell Superficial Test.
Motorised Rockwell System Hardness Tester
Motorised Rockwell System Hardness TesterClick to
RASN-M
Motorised Rockwell System Hardness Tester
Model : RASN(M)
Principal :
Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.Brinell test consists of forcing a hardened ball into surface of a test piece with a specified test-force and measuring the diameter of indentation for evaluation of Brinell hardness number.
Operation: For Rockwell & Rockwell Superficial Test
In case of ‘RASN’ series machines for Rockwell & Rockwell superficial tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator.
For Brinell Test :The operation is exactly same as above. However, the diameter of impression is measured outside of machine by Brinell microscope. Brinell hardness number is found out by referring corresponding hardness tables showing hardness number against dia. of indentation for specified ball diameter and test force.
Specification:
• Motorised for automatic Operation cycle i.e. load/dwell/unload.
• Preliminary Test Force – 98.07N (10kgf).
• Additional Test Force – 490.3, 882.6, 1373N, (50, 90, 140 kgf).
• Total Test Force – 588.4, 980.7, 1471N, (60, 100, 150 kgf).
‘FIE’ new ‘RASN’ series of Hardness Testing Machines come with much improved design and look with following major design changes.
IS : 2281, BS 10003-2 & ASTM E-10 for Brinell Test.
Rockwell Hardness TesterClick to
RAS:
We are among the top most Manufacturers and suppliers of Rockwell Hardness Tester. They provide the facility of Automatic load selection with automatic zero setting dial gauges.
Loads 60, 100, 150 kgf
Initial Load 10kgf
Max. Test Height 230mm
Depth of Throat 133mm
Max. depth of
elevating screw
below base 240mm
Size of base 170 x 430mm
Machine Height 655mm
Net Weight 65kg
Testing table 50mm dia 1 pc.
Testing Table 38mm dia with ‘V’
groove for round jobs
6 to 45mm dia. 1 pc.
Diamond Indenter 1 pc.
Stell ball indenter 1/16″ 1 pc.
Test Block Rockwell ‘C’ 1 pc.
Test Block Rockwell ‘B’ 1 pc.
Test Block Rockwell Superficial ‘N’ NIL
Allen Spanners 5 pcs
Clamping Device 1 pc.
Dash Pot Oil 1 Book
Rubber bellow for elevating screw protection 1 pc.
Instruction Manual 1 Book
Leveraging with sound methodology and infrastructure we are able to trade and export our high quality Digital Rockwell Hardness Tester. Our Digital Rockwell Hardness Tester’s testing methods are a fast and reliable tool to resolve the hardness of metals, alloys, small precision parts, wires, and in some cases, plastics. This Digital Rockwell Hardness Tester covers a range from the softest bearings to the hardest steels. This Digital Rockwell Hardness Tester highly demanded among our clientele due to its high efficiency and superior functionality.
Features:
Fast and reliable
High strength
Premium quality
Superior functionality.
Digital Rockwell
TH550
Being among the leading group of traders and exporters of machining tools we are dealing in every kind of hardness testing tools which also includes this extreme quality Digital Rockwell. Our Digital Rockwell is specially designed for testing minute, thin samples or parts after surface coating. Our Digital Rockwell’s work process is visual and its measuring is accurate. Our Digital Rockwell avoids seeing weariness & man-made errors. Many people can look into work process at the same time with help of our Digital Rockwell.
Excellent accuracy
Avoid man made errors
High effective
Affordable.
Digital Micro Vickers
TH720-721
In the array of other testing tools these Digital Micro Vickers also keeps its own identity and effectiveness. We are trading and exporting this supreme quality Digital Micro Vickers with extreme finishing and high speed performance. This Digital Micro Vickers is fitted with best and robust quality equipments like toughest material and smooth handles etc. These are more advanced than other Micro Vickers. This Digital Micro Vickers can run continuously for hours without failure or without need of cooling. This Digital Micro Vickers is available at a very commercial range of prices at our company.
Highly effective
Stable and accurate
Higher efficiency
Low depreciation rate
Hardness Tester Machine
Hardness Testing Machine
PR-1
With firm commitment to quality, we are manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Hardness Testing Machine. The experts working with us do not compromise with quality and make sure that high quality material is used in the manufacturing process. In addition to this, we customize these testers as per the requirements of clients.
Accurate results
Longer service life
High performance
Specifications:
Maximum test height 110 mm
Throat capacity 55 mm
With the help of our experienced engineers, we are manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Rockwell System Hardness Tester. In compliance with international quality standards, these products are available in various specifications. Furthermore, we offer these products to clients at industry-leading prices.
Suitable for rockwell tests
Manually operated
Test force selection by external dialing
Model Unit RASN RASN (B) RASN (T) RASN (M) RASN (E)
Major Load N 588.4, 980.7, 1471 588.4, 980.7, 1471, 1839, 2452 147.1, 294.2, 441.3, 588.4, 980.7, 1471 588.4, 980.7, 1471 588.4, 980.7
(kgf) 60, 100, 150 60, 100, 150 60, 100, 150 60, 100, 150 1471
60, 100, 150
Minor Load N 98.7 98.07 29.42, 98.7 98.7 98.7
(kgf) 10 -10 (3, 10) -10 -10
Max. Test Height mm 230 230 230 230 230
Depth of Throat mm 133 133 133 133 133
Net wt. Approx. kg. 65 70 62 67 67
Machine Dimension (Approx.) mm L-450 L-450 L-450 L-450 L-450
W-265 W-265 W-265 W-265 W-265
H-627 H-627 H-627 H-627 H-627
Motorized Digital Hardness Tester
RASN-E
We have established ourselves as a renowned organization engaged in manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Motorized Digital Hardness Tester. Our experts manufacture these testers using high quality material that is sourced from reliable vendors of market. Besides, we assure timely delivery of consignments at clients’ destination.
Motorized for automatic operation cycle i.e. load/dwell/unload
Preliminary test force
Set position with LED bar indicator for easy operation
Major Load N 588.4, 980.7, 1471 588.4, 980.7, 1471, 1839, 2452 147.1, 294.2, 441.3, 588.4, 980.7, 1471 588.4, 980.7, 1471 588.4,980.7,
(kgf) -60,100,150 -60,100,150 -60,100,150 -60,100,150 1471
-60,100,150
Motorized Rockwell System Hardness Tester
Owing to our rich industry experience, we are manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Motorized Rockwell System Hardness Tester. To manufacture the offered range, our experts make use of high quality material that is sourced from trusted vendors of the market. Post-production, these products are stringently inspected on certain well-defined parameters to rule out every possibility of defect.
Motorized for automatic operation cycle i.e. load / dwell / unload
Auto zero setting dial gauge
Our company specializes in manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Rockwell Cum Rockwell Superficial Hardness Tester. Latest machines and advanced technology are employed by our experts in the manufacturing process. Clients can avail our range at nominal rates in various specifications.
Suitable for rockwell superficial tests
Major Load N 588.4, 980.7, 1471 588.4, 980.7, 1471, 1839, 2452 147.1, 294.2, 441.3, 588.4, 980.7, 1471 588.4, 980.7, 1471 588.4, 980.7,
Vickers Hardness Tester
VM-50
Backed by rich industry experience, we are manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Vickers Hardness Tester. These testers are made using high quality material that is sourced from reliable vendors of the market. To cater to the variegated requirements of clients, we offer our range in various sizes and specifications at industry leading rates.
Testing range is very wide, from soft metal such as lead, up to the hardest, like hardened steel
Same hardness number is obtained on the same specimen, regardless of the load applied
The indentation is tiny and allows testing of a precision finished part
Test loads 5, 10, 20, 30, 50 kg
Magnification of optical projection 70 X
Maximum test height (mm) 200
Scale Least Count (mm) 0.001
Throat Depth (mm) 135
Machine dimension (mm) L 585 x W 290 x H 860
Weight (approx) 70 kg
Power Supply 220 VAC, 50Hz, 1-Phase
Computerized Hardness Tester
VM-50-PC
We hold expertise in manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Computerized Hardness Tester. High grade material is utilized to manufacture the offered range. To ensure safe transit of the offered range at clients’ destination, we pack these testers using premium quality material.
Small size of indentation makes it a non destructive testing on finished components
Motorized loading and unloading cycle
Small loads allow testing of thin sheet metals
Product details:
1 Standard Test Block 1 No.
2. Diamond indenter 1 No.
3. Weights 1 Set
4. Flat Anvil 1 No.
5. Vee-type anvil ( Small & Big ) 1 No. each
6. Spanners 1 Set
7. Electric Cord & PC interface cord 1 No. each
8. Video Capture 1 No.
9. Vicksys software CD 1 No.
10. Instruction Manual 1 Book
Total Loads 5, 10, 20, 30,50, kg
Max. Test Height(mm) 200
Scale least count(mm) 0.001
Diagonal measuring range (mm) 0.05 to 0.4
Throat depth(mm) 135
Machine Dimension (Approx.)mm L 585 x W 290 x H 860
Weight (Approx.)mm 70 kg
Power Supply 220VAC, 50Hz, 1Phase
Computerized Brinell Hardness Tester
B3000-PC
We are a trusted name in manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Computerized Brinell Hardness Tester. Manufactured employing advanced technology, our testers are in tandem with international quality standards. Besides, we offer our range at industry leading rates to esteemed customers.
High accuracy and repeatability of measurement at all loads
Faster measurement yielding to higher productivity
Hydraulic loading and unloading cycle
Products details:
Testing table 200 mm dia 1 Piece
Testing table 70 mm dia with “V” groove for round jobs 10 to 80 mm dia. 1 Piece
Ball holder 5 mm 1 Piece
Ball Holder 10 mm 1 Piece
Test Block HB-5/750 1 Piece
Test Block HB-10/3000 1 Piece
Allen Spanner 4 Piece
Telescopic Cover for elevating screw protection 1 Set
Electric Card 1 Piece
Total Load kgf 500 to 3000 in stages of 250 kgf
Magnification of objectives – 2x
Max. Test Height mm 410
Scale least count mm 0.01
Throat depth mm 200
Machine Dimension (Approx.) mm L 995 x W 400 x H 1178
Weight (Approx.) mm 450
Power Supply V/Cy/Ph 415/50/3
Measurement Range mm 1-6
Computerized Brinell Image Analysis System
We are highly appreciated in the international market for our exquisite collection of Computerised Brinell Image Analysis Systems. All these products are manufactured under the close supervision of our experienced professionals. To meet the diverse requirements of clients, we offer these analysis systems in variegated specifications at industry leading prices.
Well managed database saves readings w.r.t. batch and certificate
Report generation in the form of certificate and graph as per customer requirements
Facility for calibration and check of calibration
The Software Includes:
Facility for Auto / semi Auto / Manual modes of operation
Range: 1mm to 6 mm
Diameter with Resolution: 0.01 mm
Applications:
To measure Brinell Hardness directly on machine where presently Brinell-Microscope is used
This avoids eye straining of operator on producing testing In addition it gives far better repeated accuracy
High-low limits selections enables operator easy acceptance / rejection of components
Easy to transport anywhere and handy for use with easy setup
Scope of Supply:
One hand held unit containing CCD Camera, optics and illumination systems with connecting cable
PCI Video capture Card with drive software
Brinell Image Analysis System Software
PC and windows 98/98SE operating systems is to be procured by customer
Also Available:
Computerised Brinell Hardness Tester ( B 3000 PC )
Computerised fully automatic Brinell Hardness Tester ( B 3000 PC FA )
Fully Automatic Brinell Hardness Testing Machine
B3000PCFA
Being a customer focused organization, we are engaged in manufacturing, supplying, distributing, wholesaling, trading, retailing, importing and exporting Fully Automatic Brinell Hardness Testing Machine. All these machines are manufactured using high quality material that is sourced from vendors of high repute after scouring the market. The offered range can be customized as per clients’ requirements.
Fully automatic machine for production testing
Full computerized
High accuracy & repeatability of measurement at all loads
Basic machine with CCD camera, optics with illumination systems and connecting cable
PCI video capture card with driver software
PC and windows operating system is to by produced by customer
Accessories:
Testing Table 200 mm 1 No.
Testing Table 70 mm 1 No.
Ball Holder 5 mm 1 No.
Ball Holder 10 mm 1 No.
Test block HB 5/750 1 No.
Test block HB 10/3000 1 No.
Instruction Manual 1 No.
Load range 250 to 3000 kgf in steps of 2580 kgf.
Max test height 380 mm
Depth of throat 200 mm
Machine height ( approx ) 1185 mm
Net weight ( approx ) 450 kgs
Drive power 0.66 HP
Mains supply 415 V, 50 Hz, 3 Phase
Measuring accuracy with CCD camera and built in optics 0.01 mm
Dwell timer 1 to 99 sec.
Raising / lowering 240 mm/min