Endress Hauser
Flow Measurement
Consistent product quality, safety, process optimization and environmental protection – these are only a few reasons why industrial flow measurement is becoming more important all the time. Water, natural gas, steam, mineral oil, chemicals are some of the fluids that have to be measured day in, day out. There is no single, across-the-board technology suitable for all these applications, so you can choose the flowmeter best suited to your process needs from our comprehensive product basket.
Proline Promag 10D Electromagnetic Flowmeter
Promag D, the wafer device is designed for all applications where space is at a minimum. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10D offers accurate measurement of liquids for a wide range of applications. It will be the preferred solution for costumers in the water industry aiming for minimized cost of ownership. Promag 10D is available in a compact or remote version.
Benefits
Easy, fast centering of the sensor – innovative housing construction
Energy-saving flow measurement – no pressure loss due to cross-section constriction
Cost-effective – designed for easy applications and direct integration
Safe operation – display provides easy readable process information
Fully industry compliant – IEC/EN/NAMUR
Field of application
Electromagnetic flowmeter for bidirectional measurement of liquids with:
A minimum conductivity of ≥50 μS/cm: drinking water, wastewater
Flow measurement up to 4700 dm³/min (1250 gal/min)
Fluid temperature up to +60 °C (140 °F)
Process pressures up to 16 bar (232 psi)
Polyamide lining material
Drinking water approvals: KTW/W270, WRAS BS 6920, ACS, NSF 61
Proline Promag 10E Electromagnetic Flowmeter
Promag E is a streamlined sensor for basic chemical applications. It is the most economical solution for our chemical customers. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10E offers accurate measurement of liquids for a wide range of applications. It will be the preferred solution for customers aiming for minimized cost of ownership. Promag 10E is available in a compact or remote version.
Cost-effective sensor – ideal solution for basic requirements
Maintenance-free – no moving parts
The measuring principle is virtually independent of pressure, density, temperature and viscosity
Fully suitable for basic applications in the chemical and process industry
Device properties
Nominal diameter: max. DN 600 (24″)
All common process connections
Liner made of PTFE
2line display with push buttons
Device in compact or remote version
HART
Proline Promag 10H Electromagnetic Flowmeter
Promag H is the preferred sensor for applications with highest requirements in the food and beverage and life science industries. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10H offers accurate measurement of liquids for a wide range of applications. It will be the preferred solution for costumers aiming for minimized cost of ownership. Promag 10H is available in a compact or remote version.
Flexible installation concept – numerous hygienic process connections
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ≥ 50 μS/cm
Beverages, e.g. fruit juice, beer, wine
Dairy products, fruit juice mixes
Saline solutions
Acids, alkalis, etc.
Fluid temperature up to +150 °C (+302 °F)
Process pressures up to 40 bar (580 psi)
CIP-/SIP cleaning
Proline Promag 10L Electromagnetic Flowmeter
Promag L is the versatile standard sensor for the water and wastewater industry with a lap-joint flange concept for flexible installation independent of the orientation of the pipe flange pitch diameter. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10L offers accurate measurement of liquids for a wide range of applications. It will be the preferred solution for costumers aiming for minimized cost of ownership.
Reduced installation costs – flexible mounting by one-of-a-kind lap-joint flange concept (DN < 350/14″)
Drinking water
Wastewater
Sewage sludge
Flow measurement up to 162 000 m³/h (713 000 gal/min)
Fluid temperature up to +90 °C (+194 °F)
Lengths in accordance with DVGW/ISO
Application-specific lining of the measuring pipe from polyurethane, hard rubber or PTFE with the following drinking water permissions
KTW, WRAS, NSF, ACS
Proline Promag 10P Electromagnetic Flowmeter
Promag P is the preferred sensor for applications with highest requirements in a multitude of industries. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10P is dedicated for chemical and process applications with corrosive liquids and high medium temperatures. It will be the preferred solution for costumers aiming for minimized cost of ownership. Promag 10P is available in a compact or remote version.
Versatile applications – wide variety of wetted materials
Acid, alkalis
Paints
Pastes
Water, wastewater, etc.
Flow measurement up to 9,600 m³/h (42268 gal/min)
Fluid temperature up to +130 °C (266 °F)
Application-specific lining material
PTFE
Proline Promag 10W Electromagnetic Flowmeter
Promag W is the specialised sensor for all applications in the water industry. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10W offers accurate measurement of liquids for a wide range of applications. It will be the preferred solution for costumers aiming for minimized cost of ownership. Promag 10W is available in a compact or remote version.
Secure, reliable long-term operation – robust and completely welded sensor
Flow measurement up to 110000 m³/h (484315 gal/min)
Fluid temperature up to +80 °C (176 °F)
Application-specific lining materials
Polyurethane and hard rubber
Proline Promass 40E Coriolis Flowmeter
Promass E has a long standing reputation as a cost efficient solution for basic Coriolis applications. Combined with the Promass 40 transmitter for low-end applications and direct integration, Promass 40E offers highly accurate measurement of liquids and gases for a wide range of applications.
Modular device and operating concept resulting in a higher degree of efficiency
Flow measurement in compact design
Insensitivity to vibrations thanks to balanced dual-tube measuring system
Immune to external piping forces due to robust design
Easy installation without the need for inlet and outlet runs
The Coriolis measuring principle operates independently of the fluid’s physical properties, such as viscosity and density.
Extremely accurate measurement of liquids and gases, e.g. additives, oils, greases, acids, alkalis, lacquers, paints and natural gas
Fluid temperatures up to +140 °C (+284 °F)
Process pressures up to 100 bar (1450 psi)
Mass flow measurement up to 180 t/h (6600 lb/min)
Approvals for hazardous area
ATEX, FM, CSA, TIIS, IECEx, NEPSI
Proline Promag 50D Electromagnetic Flowmeter
Promag D, the wafer device is designed for all applications where space is at a minimum. Combined with the proven Promag 50 transmitter with push buttons, Promag 50D offers highly accurate measurement of liquids for a wide range of standard applications in the water and wastewater industry. Promag 50D is available in a compact or remote version.
Fast commissioning – application-specific Quick Setups
A minimum conductivity of ≥ 5 μS/cm: drinking water, wastewater
Drinking water approvals
KTW/W270, WRAS BS 6920, ACS, NSF 61
Connection to process control system
HART, PROFIBUS DP/PA
Proline Promag 50E Electromagnetic Flowmeter
Promag E is a streamlined sensor for basic chemical applications. It is the most economical solution for our chemical customers. Combined with the proven Promag 50 transmitter with push buttons, Promag 50E offers accurate measurement of liquids for a wide range of standard applications. Promag 50E is available in a compact or remote version.
Ex approvals for Zone 2
2line backlit display with push buttons
HART, PROFBUS PA/DP
Proline Promag 50H Electromagnetic Flowmeter
Promag H is the preferred sensor for applications with highest requirements in the food & beverage and life science industries. Combined with the proven Promag 50 transmitter with push buttons, Promag 50H offers highly accurate measurement of liquids for a wide range of standard applications. Promag 50H is available in a compact or remote version.
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of ≥5 μS/cm
Acid, alkalis, etc.
CIP/SIP cleaning
Stainless steel housing
Proline Promag 50L Electromagnetic Flowmeter
Promag L is the versatile standard sensor for the water and wastewater industry with a lap-joint flange concept for flexible installation independent of the orientation of the pipe flange pitch diameter. Combined with the proven Promag 50 transmitter with push buttons, Promag 50L offers highly accurate measurement of liquids for a wide range of standard applications. Promag 50L is available in a compact or remote version.
Proline Promag 50P Electromagnetic Flowmeter
Promag P is the preferred sensor for applications with highest requirements in a multitude of industries. Combined with the proven Promag 50 transmitter with push buttons, Promag 50P offers highly accurate measurement of liquids for a wide range of applications. Promag 50P is dedicated for chemical and process applications with corrosive liquids and high medium temperatures. Promag 50P is available in a compact or remote version.
Water, wastewater etc.
Flow measurement up to 9600 m3/h (42268 gal/min)
Fluid temperature up to +180 °C (356 °F)
Fitting lengths to DVGW/ISO
Proline Promag 50W Electromagnetic Flowmeter
Promag W is the specialized sensor for all applications in the water industry. Combined with the proven Promag 50 transmitter with push buttons, Promag 50W offers highly accurate measurement of liquids for a wide range of standard applications. Promag 50W is available in a compact or remote version.
Flow measurement up to 110000 m3/h (484315 gal/min)
Fluid temperature up to +80 °C (+176 °F)
Technical information
Proline Promag 51P Electromagnetic Flowmeter
Promag P is the preferred sensor for applications with highest requirements in a multitude of industries. Combined with the proven Promag 51 transmitter with push buttons, Promag 51P offers highly accurate measurement of liquids. Promag 51P is dedicated for chemical and process applications with corrosive liquids and high medium temperatures. it will be the preferred solution for customers needing custody transfer measurement. Promag 51P is available in a compact or remote version.
Quality – designed for custody transfer; featuring worldwide recognized metrological approvals
Electromagnetic flowmeter for custody transfer with cold water
Flow measurement up to 9,600 m3/h (42 268 gal/min)
Fluid temperature (for a certified device) up to +30 °C (+86 °F)
PTB approval
Metrological Classes A and B
With national type examination for cold water (GER)
Continous operation at Qmax possible
Proline Promag 53E Electromagnetic Flowmeter
Promag E is a streamlined sensor for basic chemical applications. It is the most economical solution for our chemical customers. Combined with the Promag 53 transmitter with touch control, four line display and extended functionality like software options for filling and dosing, electrode cleaning or advanced diagnostics, Promag 53E offers highest accuracy in the most complex and demanding measuring tasks.Promag 53E is available in a compact or remote version.
Quality – software for filling & dosing, density, electrode cleaning and also advanced diagnostics
Easy calculation – bidirectional totalizers
Automatic recovery of data for servicing
4line backlit display with touch buttons
HART, PROFIBUS PA/DP, Modbus RS485, FF, EtherNet/IP
Level
Continuous level measurement and point level detection in liquids and bulk solids
Constant product quality, plant safety and economic efficiency – these are important aspects for any level measuring point.
Levels in liquids, pastes, bulk solids or liquefied gases are often measured in tanks, silos or movable containers. For continuous, interface and density measurement as well as for point level detection a broad range of measuring principles is available. Endress Hauser supports you from planning through commissioning and also maintenance of your measuring point.
Conductive Point Level Detection Double Rod Probe 11362Z
The 11362Z is a high resistant probe for applications requiring accurate point level detection or overfill prevention in plastic vessels or vessels made of non-conducting material. The two-point control can be carried out in vessels with electrically conducting walls.
Reliable and safe measurement
Safe measurement even for applications in explosion hazardous area
Variable process connections for various applications
Conductive Point Level Detection Triple Rod Probe 11363Z
The 11363Z is a high resistant probe for applications requiring accurate point level detection or overfill prevention in plastic vessels or vessels made of non-conducting material. Three different limit points can be detected with one probe in vessels with electrically conducting walls.
Safe measurement even for applications in explosion-hazardous area
Conductive Point Level Detection One Rod Probe 11371
The 11371 is used as point level detection in vessels with liquid foodstuffs, e.g. milk, beer, fruit juice. Corrosion-resistant materials for rod and insulation and the capability of CIP/SIP make it perfectly fit for the food industry.
Reliable measurement due to corrosion-resistant materials for rod and insulation (can be used with aggressive materials)
Safe hygienic processes thanks to CIP/SIP ability of the probe (no special cleaning procedures required)
Probe can be shortened as required
Conductive Point Level Detection One Rod Probe 11375Z
The 11375Z is a cost-effective and reliable solution for conductive point level detection in process or storage tanks for all kinds of liquids.
Long operating life and reliable function without wear since no moving parts in the tank
Cost-effective probe for conductive liquid
Cooling adapter for higher fluid temperatures, as of 100°C
For conductive point level detection in process or storage tanks, for conductivity as of 0.02mS/cm. As overfill prevention with line monitoring even in Ex-area Zone 0 or as pump protection in pipes and two-point control.
Process connection: G 1 ½
Measuring range: 50 to 2,000mm (1.9 to 78.7″)
Temperature: -40 to +200°C (-40 to 392°F)
Pressure: -1 to +50bar (-15 to +725psi )
Components: Transmitter FTW325
ATEX, WHG overfill prevention
Conductive Point Level Detection One Rod Probe 11961Z
The 11961Z is a highly resistant probe for applications with aggressive medium thanks to corrosion-resistant materials for rod and insulation. It can be used in steam boilers thanks to ceramic insulation resistant to steam and hot water.
Safe and reliable measurement even in aggressive medium thanks to corrosion-resistant materials for rod and insulation
Can be used in steam boilers thanks to ceramic insulation resistant to steam and hot water
Can be deployed particularly with high pressure or vacuum
For conductive point level detection in process or storage tanks, for conductivity as of 0.02mS/cm. As overfill prevention with line monitoring even in Ex-area Zone 0, or pump protection in pipes and two-point control.
Process connection: G ½
Measuring range: 100 to 2,000mm (5.9 to 78.7″)
Temperature: -200 to +250°C (-328 to 482°F)
Pressure: -1 to +160bar (-15 to +2,320psi)
Tank Gauging Analogue Transmitter AT1
The AT1 transmitter is designed to attach to the LT series level gauge. Main functions are 4-20mA analogue output and alarm contact output.
Transmission of the tank level by analogue signals
Max. 6 alarm contact outputs
Easy maintenance due to simple mechanism
Ambient temperature: -20 to +60°C (-4 to +140°F)
Vibronic Point Level Switch Liquiphant FDL60
Liquiphant FDL60 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device.
Continuous self-monitoring
No calibration required
Resistance to vibration with optimized drive unit
Compact switching unit: Europa card 4 HP
Follow-up units checked remotely or at the touch of a button
Simplified troubleshooting with LED display
According to AK5 to DIN V 19250 recurrent function test is not necessary
Vibronic Point Level Switch Liquiphant FDL61
Liquiphant FDL61 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device.
Point level switch for all liquids or liquiefied gases up to SIL3.
Process connections: threads and hygienic connections (Tri-Clamp, dairy coupling)
Temperature: -40 to +150°C (-40 to +302°F)
Pressure: -1 to +40bar (-14.5 to +580psi)
Sensor length: 220mm to 6,000mm
International explosion protection certificates, VdTÜV100 (liquid gases), WHG overfill prevention, marine approval, 3-A
Microwave Barrier Receiver Soliwave FDR50
The Soliwave FDR50 microwave barrier uses a contact-free procedure for detection of point levels. It can be installed in containers, conduits, shafts or on free fall shafts. It is possible to take a measurement through non-metallic container materials from the outside. Suitable as point level switch for controlling and counting all types of bulk solids. It interacts with the Soliwave FQR50 emitter.
Highly reliable measurement due to adjustable sensitivity and indication of the signal strength on the receiver
Mechanical robust solution ensures cost savings over the whole life cycle of the product:
No wear and tear, long serviceable life, maintenance free
Safe solution unaffected by process conditions and even suited for hazardous areas
Typical bulk solids are: Wood chips, wood dust or flour, plaster, cement, ash, paper or cardboard shred, gravel, sand, dried powders in general, bags and boxes.
Process connections: R 1½ or 1½ NPT thread
Ambient temperature: -20 to +70°C (-4 to +158°F)
Measuring range: Max. 8m (26ft) or 20m (65ft) (depending on the version)
ATEX 1/2 GD, IECEx
Microwave Barrier Receiver Soliwave FDR56
The Soliwave FDR56 microwave barrier uses a contact-free procedure for detection of point levels. It can be installed in containers, conduits, shafts or on free fall shafts. It is possible to take a measurement through non-metallic container materials from the outside. Suitable as point level switch for controlling and counting all types of bulk solids. It interacts with the Soliwave FQR56 emitter.
Highly reliable measurement due to flush-mounted installation and possible non-contact installation as well as indication of the signal strength on the receiver
Mechanical robust solution ensures cost savings over the whole life cycle of the product: No wear and tear, process-wetted ceramic sensor diaphragm (optional), long serviceable life, maintenance free
Electronics housing can be rotated by 360°, allowing adjustment into optimum position after installation
Direct connection of the supply voltage (emitter and receiver separately or together)
Mechanically compatible to FQR50/FDR50 microwave barrier, existing process connections can continue to be used; likewise, accessories such as adapter flanges, installation brackets and sight glasses can continue to be used
Typical bulk solids are: Wood chips, wood dust or flour; plaster, cement, ash; paper or cardboard shred, gravel, sand, dried powders in general, bags and boxes.
Ambient temperature: -40 to +70°C (-40 to +158°F)
Measuring range: Max. 100m (328ft)
ATEX II 1/2 D, IECEx
Ultrasonic / Time-Of-Flight Prosonic FDU90
The FDU90 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas and with a maximum measuring range in liquids 3m (9.8ft), solids 1.2m (3.9ft).
Integrated temperature sensor for Time-of-Flight correction. Accurate measurements are possible, even if temperature changes are present
Hermetically welded PVDF sensor for highest chemical resistance
Suited for rough ambient conditions thanks to separate installation from the transmitter
(up to 300m)
Reduced build-up formation because of the self-cleaning effect
Integrated automatic sensor detection for transmitters FMU90 /FMU95 for simple commissioning
Weather resistant and flood-proof (IP68)
Integrated heating against a build-up of ice at the sensor (optional) ensures reliable measurement
Ultrasonic / Time-Of-Flight Prosonic FDU91
The FDU91 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas and with a maximum measuring range in liquids 10m (33ft), solids 5m (16ft).
Integrated automatic sensor detection for transmitters FMU90/FMU95 for simple commissioning
Ultrasonic / Time-Of-Flight Prosonic FDU91F
FDU91F sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. Also for flow measurement in open channels and at weirs. Measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Fully welded 316L with hygienic process connection available. Maximum measuring range in liquids 10m (33ft), solids 5m (16ft).
Hermetically welded sensors (316L, 1.4404, 1.4435) for highest chemical resistance
Hygienic process connections available
Ultrasonic / Time-Of-Flight Prosonic FDU92
The FDU92 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas and a maximum measuring range in liquids 20m (65ft), solids 10m (33ft). Benefits Integrated temperature sensor for Time-of-Flight correction. Accurate measurements are possible, even if temperature changes are present Hermetically welded PVDF sensor for highest chemical resistance Suited for rough ambient conditions thanks to separate installation from the transmitter (up to 300m) Reduced build-up formation because of the self-cleaning effect Integrated automatic sensor detection for transmitters FMU90/FMU95 for simple commissioning Weather resistant and flood-proof (IP68) Dust-Ex and Gas-Ex certificates available (ATEX, FM, CSA) Field of application Sensor for continuous, non-contact level measurement of fluids and bulk materials in silos, on belts, stockpiles and in crushers. Also for flow measurement in open channels and at weirs. Typically used in measurements in low structural heights. Process connection: thread Temperature: -40 to +95°C (-40 to +203°F) Pressure: +0.7 to +4bar (+10 to +58psi) Maximum measuring range: liquids 20m (65ft), solids 10m (33ft) Blocking distance: 0.4m (1.3ft) International explosion protection certificates
Ultrasonic / Time-Of-Flight Prosonic FDU93
The FDU93 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas and a maximum measuring range in liquids 25m (85ft), solids 15m (50ft).
Non-contact measurement method minimizes service requirements
Dust-Ex and Gas-Ex certificates available (ATEX, FM, CSA)
Sensor for continuous, non-contact level measurement of fluids and of bulk materials in silos, on belts, stockpiles and in crushers. Also for flow measurement in open channels and at weirs. Typically used in measurements in low structural heights.
Process connection: thread
Temperature: -40 to +95°C (-40 to +203°F)
Pressure: +0.7 to +3bar (+10 to +43psi)
Maximum measuring range: liquids 25m (85ft), solids 15m (50ft)
Blocking distance: 0.6m (2ft)
International explosion protection certificates
Pressure
Powerful instruments for process pressure, differential pressure, level and flow.
Whether pressure, level or flow, today pressure measurement technology is often used for measuring liquids, pastes and gases. With a wide range of sensor technology Endress Hauser offer instruments with perfect fit for any kind of application.
Differential Pressure Flow Deltatop DN61S
The Deltatop DN61S is part of the universal differential pressure flowmeter systems with as primary elements as: Venturi tubes, nozzles, orifice plates and dP transmitters Deltabar S/M. As with Venturi tubes, a wide variety of nozzles are available. These nozzles can be standardized or developed in line with manufacturers specifications. Practically all versions can be provided by Endress+Hauser. A nozzle consists of a convergent section with a rounded profile and a cylindrical throat.
Customized or application-specific flowmeter systems based on the dP method for special applications, such as: Low pressure loss, high abrasion resistance, calibratable meter runs, extended nominal diameter range, controlled pressure reduction
Optimized for minimum pressure loss, maximum accuracy or maximum turndown
Measuring range of the Deltabar differential pressure transmitter adjusted on delivery
Application of international standards (e.g. ISO 5167)
Robust design and no moving parts
Flow measurement of gases, steam and liquids.
Pipe diameters from DN 50 (2″) to DN 500 (20″)
Medium temperatures from: -200 to +1,000°C (-328 to +1,832°F)
Pressure: up to 420bar (6,300psi)
Compliant with PED 97/23/EC
NACE-compliant materials
Differential Pressure Flow Deltatop DN62S
The Deltatop DN62S is part of the universal differential pressure flowmeter systems with as primary elements as: Venturi tubes, nozzles, orifice plates and dP transmitters Deltabar S/M. As with Venturi tubes, a wide variety of nozzles are available. These nozzles can be standardized or developed in line with manufacturers specifications. Practically all versions can be provided by Endress+Hauser. A nozzle consists of a convergent section with a rounded profile and a cylindrical throat.
Customized or application-specific flowmeter systems based on the dp method for special applications, such as: low pressure loss, abrasion resistance, calibratable meter runs, extended nominal diameter range, controlled pressure reduction
Optimized for minimum pressure loss, maximum accuracy or maximum turndown
Measuring range of the Deltabar differential pressure transmitter adjusted on delivery
Application of international standards (e.g. ISO 5167)
Robust design and no moving parts
Pipe diameters from DN10 (3/8″) to DN2000 (80″)
Medium temperatures: -200° to 1,000°C (-328° to 1,832°F)
Pressure up to 420bar (6,300psi)
Compliant with PED 97/23/EC
NACE-compliant materials
Differential Pressure Flow Deltatop DO61W
The Deltatop DO61W is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is a measuring flange with exchangeable orifice plate in compact or remote design and included accessories.
Selectable according to the application: operational compact version or modular remote version
Optimized for minimum pressure loss, highest accuracy and maximum measuring dynamics
Measurement method globally standardized according to ISO 5167
Cost-effective solution thanks to its robust design without moving parts
Nominal diameters from DN25 (1″) to DN600 (24″)
Medium temperatures: -200 to +1,000°C (-328 to +1,832°F)
Pressure up to 420bar (6300psi)
Differential Pressure Flow Deltatop DO62C
The Deltatop DO62C is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is an undivided standard orifice with carrier ring in compact or remote design and included accessories.
Optional symmetric orifice for bidirectional measurements
Nominal diameters from DN 25 (1″) to DN 600 (24″)
Differential Pressure Flow Deltatop DO63C
The Deltatop DO63C is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is a three-piece orifice with carrier rings in compact or remote design and included accessories.
Nominal diameters from DN 25 (1″) to DN 1000 (40″)
Medium temperatures from: -200 to +1,000°C (-328 to +1,832°F)
Differential Pressure Flow Deltatop DO64P
The Deltatop DO64P is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is an orifice plate for mounting between two flanges.
Nominal diameters from DN25 (1″) to DN1000 (40″)
Differential Pressure Flow Deltatop DO65F
The Deltatop DO65F is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is a meter run with standard orifice in compact or remote version and included accessories.
Differential Pressure Flow Deltatop DO69S
The Deltatop DO69S is part of the universal differential pressure flowmeter systems. With venturi tubes, nozzles, orifice plates and Deltabar S/M differential pressure transmitters. In addition to the standard products DO61W, DO62C, DO63C, DO64P, DO65F, Endress+Hauser also supplies primary devices in the form of orifice plates in a wide range of special designs which cannot be specified within the framework of the standard products mentioned above.
Customized or application-specific flowmeter systems based on the differential pressure method for special applications
Based on international standards (e.g. ISO 5167)
Cost-effective solution thanks to its robust design without moving parts
Pipe diameters from DN10 (3/8″) to DN2000 (80″)
Medium temperatures: -200 to +1,000°C (-328 to +1,832°F)
Pressure up to 420bar (6,300psi)
Differential Pressure Flow Deltatop DP61D
The Deltatop DP61D is part of the differential pressure flow measurement and Deltabar S/M differential pressure transmitter. It is an average pressure Pitot tube with diamond profile.
Optimized for minimum pressure loss and highest accuracy
Deltabar differential pressure transmitter ready adjusted
Display configured for flow rate, differential pressure or 0 to 100 %
Suited for bidirectional measurements
Differential Pressure Flow Deltatop DP62D
The Deltatop DP62D is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is an average pressure Pitot tube with diamond profile, which has the possibility to have an integrated temperature measurement.
Differential Pressure Flow Deltatop DP63D
The Deltatop DP63D is part of the differential pressure flow measurement with orifices and Deltabar differential pressure transmitter. It is an average pressure Pitot tube with diamond profile, who has the possibility to have an integrated temperature measurement.
Differential Pressure Flow Deltatop DR61S
The Deltatop DR61S is part of the universal differential pressure flowmeter systems. With primary elements as: Venturi tubes, nozzles, orifice plates and Deltabar S/M differential pressure transmitters. Restriction orifices are installed in pipes with the specific aim of reducing pressure or restricting flow. Generally speaking, restriction orifices are very similar to orifice plates but the former do not need an additional transmitter as in the case of flow measurement.
Differential Pressure Flow Deltatop DV61S
The Deltatop DDV61S is part of the universal differential pressure flowmeter systems. With primary elements as: Venturi tubes, nozzles, orifice plates and differential pressure transmitters Deltabar M/S. Many versions of Venturi tubes are available and standardized in accordance with a range of international or national standards, practically all of which can be provided by Endress+Hauser.
Hydrostatic Level Measurement Deltapilot FMB50
The compact Deltapilot FMB50 transmitter with the condensate resistant Contite measuring cell is typically used in the process and hygiene industries. It is made for level measurement in liquid and paste-like media in open or closed containers and unaffected by possible foam formation. Designed according to IEC 61508 for use in SIL2 safety systems.
Hermetically sealed Contite measuring cell with condensate-resistance, high reference accuracy: ±0.2%, optionally ±0.1% and minimum temperature effects thanks to active temperature compensation
Very good repeatability and long-term stability
End-to-end modularity for differential pressure, hydrostatics and pressure, e.g. replaceable display, universal electronics
Easy commissioning without the need for an operating tool
Easy and safe menu-guided operation: On site via display module, via 4 to 20mA with HART, via PROFIBUS PA, via FOUNDATION Fieldbus
International usage thanks to a wide range of approvals
Hydrostatic Level Measurement Deltapilot FMB51
The Deltapilot FMB51 rod version for top mounting with the Contite measuring cell is typically used in the environmental industry. It is made for level measurement in liquid and paste-like media in open or closed containers and unaffected by possible foam formation. Designed according to IEC 61508 for use in SIL2 safety systems.
Software Solutions
The software tools that provide to run your operating process at its full potential
Apart from all relevant measuring and system technologies, we also offer appropriate software tools for all branches of industry. Our comprehensive portfolio spans a range of software solutions for inventory management optimizing your inventories and supply chain, for device calibration and configuration through to condition monitoring by providing valuable asset information over the entire life cycle, for energy management efficiently use and monitor energy use in order to reduce costs.
Our software for central data management and visualization of stored data allows monitoring the quantities, trending as well as alert indicators for your stock availabilities in order to optimize your inventories and supply chain.
From device calibration and configuration through to condition monitoring by providing valuable asset information over the entire life cycle, our software support you in optimizing your installed base during the commissioning and operation phase.
Gas, steam or water circuits that provide specific forms of energy to the operating process can be found in all branches of industry. Our appropriate software for energy management efficiently use and monitor energy use in order to reduce costs.
In addition, we offer software for easy connection of field devices to process visualization systems via a standard interface as well as software which can be used to configure recorders, temperature transmitters, samplers and system components.
FDM Software, MS20 Field Data Manager Software
Field Data Manager (FDM) is a software package offering central data management and visualization of stored data. This allows complete and manipultation proteced documentation of stored data, e.g.: measurement values, diagnostics events and protocols. FDM stores the data tamper proof in a SQL database. Following data bases are supported: PostgreSQL (provided on the Field Data Manager Software CD), Oracle or Microsoft SQL Server.
Energy Software ESight MSE10
eSight is a comprehensive and intuitive software package offering professional methods for the management of energy-related data. eSight is fully web based making it available online. The software can also be installed to a client. Data can be automatically imported from data loggers, BMS and SCADA systems, production systems, electronic billing and spreadsheets. Interfaces for system integration with the most important system manufacturers making integration of existing systems very easy.
Completely web-based application
Scalable architecture
Intuitive operation
System configuration easy to create and maintain
Language packages
Automatic data import
Inventory Management Tankvision Professional NXA85
Tankvision Professional is a software which can manage data from the field. The parameters are forwarded via Tankvision Tank Scanner, Tankvision Multiscan and even PLC or DCS systems via open standards such as Modbus and OPC DA Client. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular structure it is ideally suited for tank farms as well as large refineries with hundreds of tanks.
Single access point for up to 400 tanks on one system
Step-by-step site upgrade
Best fit visualization
Precise inventory
Simplified site approval procedures
ReadWin 2000 PC Software
ReadWin 2000 is a PC software for device configuration, central data management and visualization of stored data. Supported device could be configured and parameter set can be stored. Stored data from data managers can be read out and tamper proof archived. Archived data can be printed and exported. Users can install and use the software without any restrictions.
Easily set up units from the PC
Display signal sequences
Electronically archive measurement points
Export pre-analyzed values into other programs (e.g. MS® Excel)
Use modem connections to distant units
Device parameterization and visualization
Download links:
PC Software ReadWin 2000
Version Info
Storage Calculator
USB driver (TXU10, CDI, Data Manager)
CompuCal
CompuCal is a high performing software tool that meets all requirements regarding calibration and maintenance management. Developed with key users and proven in industries CompuCal allows to efficiently maintain and calibrate your on-site instrumentation. It fulfills the highest demands of the regulated industries, and at the same time reduces complexity, time and costs associated with the management of the calibration and maintenance activities.
Controls the maintenance and calibration schedules, issuing work orders and reports as defined by maintenance personnel
Can attach important documents such as SOP’s, Health and Safety sheets, Loop diagrams to each tag
Incorporates audit trail and high security features
Full records sheet for each tag allowing all important data to be logged and recorded
Offers seamless data transfer with other Endress+Hauser Tools – W@M, FieldCare and IBA-C, allowing for quick data import from existing Installed Base Analysis files
System Components
Nowadays the requirements on measurement technology go far beyond the mere recording of measurement values. Thus the measuring devices are to be supplied with power and to be protected against overvoltage, the measurement value is to be visualized or processed, limit values have to be monitored as well as the data has to be tamper-proof archived. These tasks are covered by the system components and data managers from Endress Hauser.
Easy installation and user friendly setup and operation
Real-time plant information on-site
Increased plant availability due to proactive diagnostics and protection of the measurement devices
Flexibility in application based on various housing versions, all important communication protocols and worldwide approvals
Complete portfolio around the measurement point from one supplier
Commubox FXA195 USB/HART
The Commubox FXA195 is a intrinsically safe interface for Smart transmitters. It converts HART protocols to USB signals.
Remote commissioning of field devices directly from the control room or anywhere in the current loop
Full support for FieldCare and ReadWin operating programs
For connection to intrinsically safe circuits (4…20 mA)
Reactionless in accordance with IEC 61508 for connection to 4…20 mA SIL 2 loops
Switchable communication resistor
USB/HART driver for the installation on Windows 7 (x32+x64) and Windows XP
Adapter cable 4mm/2mm supplied
Commubox FXA291 CDI/USB
The Commubox FXA291 is a intrinsically safe CDI (Endress+Hauser Common Data Interface) interface for transmitters. It converts signals at USB interface. The communication between field devices and computer is realized by direct connection via CDI, via ToF adapter FXA291 or via additional adapter cable.
On-site commissioning of Endress+Hauser field devices
Easy to connect field devices with a CDI interface to a computer with a USB interface
Power is supplied to Commubox by means of the USB interface
Possible to supply power to the field devices by means of the CDI interface
Connection to intrinsically safe and non-intrinsically safe field devices
Suitable for Endress+Hauser operating programs such as FieldCare
CDI/USB driver for the installation on Windows 2000, Windows XP and Windows 7 (x32+x64)
Gateway For Remote Monitoring Fieldgate Fxa320
Fieldgate FXA320 was developed for remote monitoring of field devices with analog or digital interface. GPRS technology is used for wireless communication via the worldwide GSM mobile communications network. Fieldgate FXA320 contains an integrated web server offering data logging and alarm management functions. Typical applications are remote monitoring of level and pressure devices in tanks and silos.
Simple configuration of Fieldgate, easy visualization of measured values via its integrated web server
Point level monitoring with alarming by e-mail or SMS
Supporting communication interfaces GSM/GPRS as well as Ethernet
Monitoring of field devices regardless of location with XML data transfer allows for simple processing of the measured data
High security through encryption during data transmission to an Endress+Hauser server
Optional power supply for field devices
Configuration of measuring and transmission cycles
Gateway For Remote Monitoring And Diagnosis Fieldgate Fxa520
Fieldgate FXA520 was developed for remote monitoring of field devices with HART or 4 to 20mA interface, regardless of location. GPRS technology is used for wireless communication via the worldwide GSM mobile communications network. In addition, Fieldgate FXA520 can be used as a HART/Ethernet gateway in local networks. Fieldgate FXA520 contains an integrated web server offering data logging and alarm management functions.
Remote diagnosis and remote parameterization of connected HART field devices (CommDTM)
Monitoring of HART / 4 to 20mA field devices regardless of location with XML data transfer allows simple processing of the measured data
Supporting communication interfaces Ethernet as well as GSM/GPRS
Intrinsically safe version EEx ia IIC for applications in hazardous areas, applicable in 4 to 20mA SIL2 loops (IEC 61508)
Visualization of up to four HART measured values per device
Optional enhancement of inputs (4 to 20mA or digital) via input module FXZ520 (max. 28 measurement inputs)
Fieldgate FXA720 Enables Remote Monitoring
Fieldgate FXA720 is a gateway with integrated Web server for communication with PROFIBUS devices. Within a control system, Fieldgate FXA720 ensures transparent vertical communication by acting as a simple passthrough gateway. A CommDTM allows it to be integrated into a FDT frame application such as FieldCare. For Web applications, the unit contains a Web server that generates HTML pages for viewing in a standard internet Web browser. It also offers XML data for e.g. Office applications.
Quick set-up via Web browser, no configuration tool necessary, communication via Internet, worldwide access to sensor data
User Management, limits access to authorised persons
Integrated Web server, values available to any Web browser
Alarming and event messaging, E-mail about device status
Data offered in HTML and XML format, seamless data integration into MS Office, P View and FieldCare
CommDTM supplied, simple integration into FDT frame applications, e.g. FieldCare
Monitoring via OPC, OPC server can be supplied
Temperature
Endress Hauser offers a complete assortment of compact thermometers, modular thermometers, thermowells, measurement inserts, transmitters and accessories for all types of process industries such as Oil & Gas, Chemicals, Food & Beverage, Life Sciences, Primaries & Metal, Power & Energy.
Highest plant availability & safety through most reliable sensor technology & traceable, accredited calibrations
Cost savings & process optimization through fast, robust & highly accurate iTHERM sensors
Lowest operating expenditures through seamless integration, easy handling and long lifetime
Trouble-free plant certification through international approvals
User-friendliness and expert’s support through all stages of the life cycle
MLTTS00 Modular Thermometer With RTD Or TC Insert
The modular and robust thermometer finds its use in applications for the Oil & Gas industry but also in almost all industries. An optional head transmitter, with all common communication protocols, makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. The thermometer can be ordered either with resistance (RTD) or with thermocouple (TC) insert.
High degree of flexibility thanks to modular design with standard terminal heads as per DIN EN 50446 and customer-specific immersion lengths
Types of protection for use in hazardous locations: Intrinsic Safety (Ex ia)
MLTTS01 Modular Thermometer With RTD Or TC Insert
The modular and robust thermometer finds its use especially in the Oil & Gas industry. Harsh environments, corrosive substances and high pressures can be handled by the use of robust thermowells and special materials. An optional head transmitter, with all common communication protocols, makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. The thermometer can be ordered either with resistance (RTD) or with thermocouple (TC) insert
MLTWS01 Thermowell For Temperature Sensors
This protection tube is an important component for temperature measurement points for almost all industrial processes, especially for Oil & Gas industries. It is used to protect the measuring insert or sensor elements from aggressive process media, high pressures and flow rates from the temperature sensor itself and thereby enables the thermometer to be exchanged during operation.
Thermowell fabricated from welded tubes
The process connection is flanged
Extension, immersion length and total length can be chosen according to process requirements
Special versions can be manufactured according to customer requirements
T13 Explosion Proof Pt100 Thermometer, US Style
The robust thermometer is designed for use in demanding and safety relevant applications e.g. in Chemical, Oil & Gas and Energy industry. Harsh environments, corrosive substances and highest pressures can be handled by the use of robust thermowells and special materials. A optional head transmitter with all common communication protocols makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. Flexible configuration possible.
T14 Explosion Proof Pt100 Thermometer, US Style
Analysis
Comprehensive product range for all analytical parameters
Environmental protection, consistent product quality, process optimization and safety –¿¿¿ just a few reasons why liquid analysis is becoming increasingly essential. Liquids such as water, beverages, dairy products, chemicals and pharmaceuticals have to be analyzed day in and day out. We support you in fulfilling all these measuring tasks with application know-how and cutting-edge technologies. Discover our comprehensive portfolio and choose the product best suited to your process needs.
Aluminum Analyzer Stamolys CA71AL
The CA71AL online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate measurement enables you to make sure that the aluminum content of potable water always complies with regulations. CA71AL also helps to optimize the dosage of aluminum precipitants for phosphate elimination saving money in wastewater applications.
Automatic calibration and self-cleaning
Free selectable measuring, cleaning and calibration intervals
Measured value storage using integrated data logger
Trace measurement from 10 μg/l possible
Two-channel version available
Phosphate elimination in sewage treatment plants
Precipitant monitoring in wastewater and drinking water applications
Ammonium Analyzer Stamolys CA71AM
The CA71AM online analyzer improves analytic procedures by replacing manual cuvette tests. Constant monitoring of ammonium helps you to optimize the wastewater treatment and to ensure that you are always compliant with discharge regulations. Automatic cleaning and calibration reduce maintenance and save you time while low reagent consumption saves operating costs.
Trace measurement from 1μg/l possible
Monitoring and optimizing the cleaning capacity of wastewater treatment plants
Monitoring activated sludge basins
Monitoring wastewater treatment plant outlets
Monitoring of drinking water inlets
Monitoring of industrial water treatments
Chlorine Analyzer Stamolys CA71CL
The CA71CL online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate monitoring of free and total chlorine supports the control of the disinfection process to make sure that the water is free of germs. CA71CL uses the standardized DPD measuring method and thus ensures full compliance with regulations.
Drinking water treatment
Monitoring of wastewater outlets
Monitoring of swimming pool water
Process water treatment
COD Analyzer Stamolys CA71COD
The CA71COD online analyzer actively supports your maintenance strategy by replacing manual cuvette tests. The constant monitoring of the chemical oxygen demand (COD) increases process safety and supports a load-based billing system for industrial wastewater treatment plants. An optional backflush pump provides reliable measurement even in inlet wastewater applications. The analyzer waste is split into dichromate and dichromate-free and ensures high environmental compliance.
DIN- and GB-compliant thermal digestion
High accuracy
Low reagent requirement
Mercury-free chloride elimination
Monitoring sewage treatment plant inlets and outlets
Monitoring of industrial wastewater discharges
Evaluation of the oxygen demand in aeration basins
Monitoring of industrial wastewater
Chromate Analyzer Stamolys CA71CR
The CA71CR online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate measurement enables you to optimize chromate dosing. This guarantees excellent corrosion protection in cooling towers, productive galvanizing and pigmenting processes, and efficient production of stainless steel. CA71CR uses a standardized measuring method ensuring full compliance with discharge regulations.
Chromate monitoring in industrial wastewater treatment plants
Chromate monitoring in process industry
Copper Analyzer Stamolys CA71CU
The CA71CU online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate measurement enables you to ensure effective removal of copper from industrial wastewater. This guarantees excellent protection of your wastewater treatment plant’s biology and full compliance with discharge regulations.
Copper monitoring in industrial wastewater treatment plants
Copper monitoring in process industry
Iron Analyzer Stamolys CA71FE
The CA71FE online analyzer improves analytic procedures by replacing manual cuvette tests. Thanks to its highly accurate measurement, you can make sure that potable water or mineral water is clear and of high quality. CA71FE also supports you in providing reliable documentation of the water’s iron content for compliance with international regulations.
Residual iron monitoring after precipitation, flocculation and filtration processes
Iron containing process water monitoring
Total Hardness Analyzer Stamolys CA71HA
The CA71HA online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate measurement supports you in protecting process water cycles from calcification and helps to increase process efficiency. CA71HA also enables you to ensure a high quality of potable water that is suitable for household use and fully complies with international regulations.
Fast response time due to low system volume and short distances
Low reagent and sample requirement
Two selectable measuring ranges
Total hardness monitoring in reverse osmosis systems
Total hardness monitoring in ion exchange systems
Precipitant monitoring in drinking water plants
Hydrazine Analyzer Stamolys CA71HY
The CA71HY online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate measurement enables you to optimize hydrazine dosing in your water and steam cycles. This guarantees the best possible corrosion protection of your systems and increases process safety and efficiency.
Monitoring of cooling water cycles
Monitoring of boiler feedwater
Monitoring of steam systems
Hydrazine is vapor-volatile and assists the self-protection of steel surfaces. It is used as oxygen-binding agent and corrosion inhibitor in water and steam cycles.
Manganese Analyzer Stamolys CA71MN
The CA71MN online analyzer improves analytic procedures by replacing manual cuvette tests. Thanks to its highly accurate measurement, you can make sure that drinking water or mineral water is clear and of high quality. CA71MN also supports you in providing reliable documentation of the water’s manganese content for compliance with international regulation.
In soil, manganese is often found as brownstone. With changing ground water level, water-soluble manganese compounds are formed due to microbial processes.
Manganese monitoring in drinking water treatment plants
Precipitant monitoring after aeration and filtration processes in drinking water and wastewater treatment plants
Nitrite Analyzer Stamolys CA71NO
The CA71NO online analyzer improves analytic procedures by replacing manual cuvette tests. The system’s high accuracy supports you in meeting the specified nitrite limits. CA71NO uses a standardized measuring method and thus ensures full compliance with international regulations.
Nitrite monitoring in drinking water
Nitrite monitoring in sewage treatment plants
Nitrite monitoring in the mineral water production
Ortho-Phosphate Analyzer Stamolys CA71PH
The CA71PH online analyzer improves analytic procedures by replacing manual cuvette tests. Its highly accurate monitoring of phosphate enables you to optimize precipitant dosing. This prevents increased sludge volumes in wastewater applications. And you can save on precipitants. CA71PH uses standardized measuring methods and thus ensures full compliance with discharge regulations.
Monitoring and optimizing the cleaning capacity of sewage treatment plants
Controlling of precipitant addition
Monitoring of activated sludge basins
Monitoring of sewage treatment plant outlet
Silica Analyzer Stamolys CA71SI
The CA71SI online analyzer improves analytic procedures by replacing manual cuvette tests. Its quasicontinuous measurement enables you to ensure a constant optimum water quality even under thermal charge or high pressure. This guarantees a high performance of ion exchangers and reverse osmosis systems increasing process safety and efficiency.
Ultrapure water
Boiler feedwater
Steam and condensate analysis
Reverse osmosis
Demineralizers
Industries:
– Pharmaceutical industry
– Power stations
High Temperature TOC Analyzer CA72TOC
CA72TOC determines the total organic carbon (TOC) content in a number of industries. It measures reliably and accurately even in heavy duty applications with high loads of salt, fat or fibers. The reliable detection of product losses increases the process yield and saves money every day. Designed for long-term stability and highest availability, the CA72TOC offers maximum operational safety of your plant. Clear diagnostic messages actively support your predictive maintenance strategy.
Optimized for industrial applications even with varying pH values and high salt loads
Fast and easy maintenance thanks to good accessibility of all components
Exchangeable furnace concept significantly decreases service time thanks to prepared furnace
Improved process stability and safety: Immediate readjustment of the process based on online information.
Accurate and fast measurement with “Double Batch” operation
One and two-channel measurement available
Total Phosphorus Analyzer Spectron CA72TP
The Spectron CA72TP monitors total phosphorus, an important nutrient parameter in wastewater applications. In your wastewater treatment plant, it helps to increase process efficiency and simplifies recording of measured values. The robust design and large tube diameters minimize maintenance effort, whereas clear diagnostic messages actively support your predictive maintenance strategy. Its built-in sample preparation is equipped with a self-cleaning cross-flow filter to prevent blockages.
Automatic two-point calibration
Low-maintenance owing to large tube diameter
No complex sample preparation
Blue method: highly accurate in lower measuring range
Yellow method: optimized for high measuring ranges
The sewage treatment plant outlet
Process water
Surface water
Cooling water