RTTI- Reliance Technical Training Institute





Photoelectric Sensors

Photoelectric sensing uses a beam of light to detect the presence or absence of an object. This technology is an ideal alternative to inductive proximity sensors when the required sensing distances are longer or when the item to be sensed is non-metal. Autonics 4-kind general purpose photoelectric sensor products lines are designed with its advanced technology combined with the optic & electric technology, are widely selected in the various fields of industry for its optimized functions, quality, application flexibility and reliability while remaining strongly competitive with its price among the whole industry.
Photoelectric Sensor

Miniature and built-in amplifier for long sensing distance type (BJ series)

Long sensing distance with high function lens (Max. 15m)
Through beam / Diffuse reflective / Retro reflective
Compact size: W32 x H20 x L10.6 mm
NPN / PNP open collector output
Light on / Dark on selectable
Built-in sensitivity adjustment VR
Stable detection for transparent object (LCD, glass etc) by BJG30-DDT
IP67 water proof (IEC standard)
Power supply: 12-24VDC

Photo micro sensor (BS5 series)

Built-in miniature amplifier
Sensing distance: Fixed 5mm
Various appearance: K, T, L, V, Y
NPN open collector output
High speed response frequency: 2 KHz
Power supply: 5-24VDC
Connection: connector type

Small diffuse reflective type with long sensing distance (BA2M–DDT)

Sensing distance: 2m
2 color LED [Operation: Red, Stable: Yellow(Red + Green)]

Small emitter/receiver synchronizing type (BY500 series)

Built-in amplifier
Size: W12 x H16 x D30mm
Reverse power polarity and over current protection circuit
Fast response speed: 1ms

DC back ground suppression diffuse reflective type (BYD30 / BYD50)

Superior detection not affected by color of target
Sensing distance: 10-30mm / 10-50mm
Adjustable the response time (OFF Delay time: 0.1-2sec)

Slim and built-in amplifier through beam type (BPS3M)

Easy to mount by flat type (W28 x H16 x D7.7mm)
Realization of 3m sensing distance as small size

Compact and built-in amplifier (BM / BMS)

Easy to mount at a narrow space with small size and light weight
Size: W51.5 x H27.7 x W16mm (BM), W55 x H28.5 x 16mm (BMS)
Sensing distance: Through beam(3m), Diffuse reflective(200mm), Retro reflective(0.1-1m)

Universal voltage type with built-in amplifier (BEN)

Relay output / NPN,PNP open collector output
Sensing range: 10m for through beam, 0.1-5m for retro reflective, 300mm for diffuse reflective and 0.1-3m for polarized retro reflective type
Selectable Light ON or Dark ON mode by switch
Size: W50 x H50 x D18mm

Terminal type photoelectric sensor for long distance (BX)

Universal power supply (24-240VDC/AC, 12-24VDC)
Sensing range: 15m for through beam, 0.1-5m for retro reflective, 700mm for diffuse reflective and 0.1-3m for polarized retro reflective type
NPN/PNP open collector output (DC power supply), Relay output (Universal power supply)
Self diagnosis function (Green LED)
Timer : ON delay, OFF delay, One-shot Delay
Size:W80 x H68 x D25mm

Cylindrical photoelectric sensors (BR Series)

Detects up to 20m (Through-beam type)
High-speed response time under 1ms
Excellent heat-resistance performance with glass lens (BR4M)
IP66 protection structure (IEC standard)



Fiber Optic Sensors

Fiber Optic sensors, photo lens eliminated amplifier combined with fiber optic cable, are ideal where small objects detection and quick response time is required. Moreover, the high flexibility of the optic cable allows easy installation fitting almost anywhere. Autonics fiber optic sensing amplifiers and cables of real compact body offer sophisticated part detection, quick response time and generous sensing range.
Fiber Optic Sensor

Used for small object detection and where quick response time is required.
Fiber Optic Sensor BF5

BF5 series which senses high speed moving objects & minute objects, due to its 1/10,000 high resolution & high speed sensing (20,000 times per sec)
It is having Dual-display for light incident level and setting value (BF5R-D).
Up to 8 units adjacent mounting is possible with mutual interference prevention function.
It has 4 types of response time settings i.e. Ultra Fast mode (50microsec), Fast mode (150microsec), standard mode (500microsec), and long distance mode (4ms).
The design is very slim (W10 X H30 X L70mm).
The power supply voltage is 12-24 VDC.
The output is NPN open collector output.
Fiber Optic Amplifier (BF4R)

Min. sensing object: Ø 0.03mm
Auto sensitivity setting (Button setting) / Remote sensitivity setting
Response time: Max. 0.5 ms
Output: PNP/NPN open collector.
Light ON / Dark ON mode selectable
Supply voltage: 12 to 24 VDC
DIN rail mounting available
Timer function: Off delay 40ms fixed
External synchronization input function, Mutual interference protection, Self diagnosis function
Overcurrent protection and reverse power polarity protection circuit
Light source: RED(BF4R) / GREEN(BF4G)

Fiber Optic Amplifier (BF3R)

Able to adjust sensitivity with high accuracy by dual adjuster
High speed response: Max. 1ms
Selectable Light ON / Dark ON mode by control wire
Supply voltage: 12 to 24VDC
Over current protection and reverse power polarity protection circuit

Fiber Optic Cable

Through beam type, Diffuse reflective type
M3, M4, M6 mm
Fiber diameter: 0.5mm, 1mm
Sensing distance
a. Transmitted beam type: Up to 400 mm with BF4R
b. Diffuse reflective type: Up to 120 mm with BF4R
Available both Plastic and Glass cable
Available heat resistance type
Able to use for explosion proof (fiber part)
Adjustable length with free cut type optic cable


Proximity Sensors

Proximity sensors are the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face. Autonics offers 12 products of 6 different types of proximity sensors, inductive and capacitive, and maintains No. 1 market share in Korea for more than 10 years, and still endeavoring to advance product quality and sensing reliability up to the top level of global marketplace. If you are looking for the most cost effective and reliable proximity sensors, Autonics is the answer.
Capacitive And Inductive Proximity Sensors

Capacitive type

Able to detect iron, metal, plastic, water, stone, wood etc
Easy to control of level and position
Easy to adjust of the sensing distance with built-in sensitivity adjuster
Built-in protection circuit of reverse power polarity, surge, over current
DC 3 wire type: M18 / M30 with up to 15mm sensing distance
AC 2 wire type: M18 / M30 with up to 15mm sensing distance
Output: NPN / PNP , NO / NC
Power supply: 100-240VAC (AC 2-wire), 12-24VDC(DC 3-wire)

Inductive type

Improved the noise resistance with dedicated IC (DC 2-wire, DC 3-wire)
Long sensing distance 4/8mm for M12, 7/14mm for M18 & 15/25mm for M30
Shape: Cylindrical, Square & Rectangle Type
Size for Cylindrical type Ø in mm – M8, M12, M18 & M30
Size for Square & Rectangle type in mm – 12, 17, 25, 30, 40, 50 & 80
Available Sensing Distance in mm – 1.5, 2, 4, 5, 7, 8, 10, 14, 15, 20, 25, 30 & 50
Power Supply for AC (2-wire) : 100-240VAC
Power Supply for DC (2-wire) : 15-30VDC
Power Supply for DC (3-wire) : 12-24VDC
Output type: NPN/PNP, NO/NC (DC 3-wire)-NO/NC (AC/DC 2-wire)
Protection Circuit: Surge, Overcurrent & Reverse Polarity protection
Protection: IP67 (IEC Standard)
Connection: Cable, Connector, Cable outgoing and cable outgoing connector type
CE approved



Door Side Sensors

Door/Door side sensors, generally applied for the automatic door management systems, are a kind of the photoelectric light beam sensors using infrared rays through specially designed lenses to detect the presence or absence of an object. Autonics ADS series provides ultra precise sensing results for safer and more faithful door management systems.
Auto Door Side Sensor

Auto Door Sensor

Diffuse Reflective Type (Infrared reflection )
Power supply: 24-240VAC/DC, 12-24VAC/DC
Control output: Relay contact
Mounting Height: 2 m to 2.7 m
Max. sensing distance: 3 m
Stop time selection function (2 / 7 / 10 sec)
4 steps variable function for front sensing area (7.5°, 14.5°, 21.5°, 28.5° 4 steps varible)
Right/Left sensing area elimination function
Built-in Microprocessor

Door Side Sensor

Transmitted Beam Type
Available sensor set: 2 sets
Sensing Distance: 0 -10 m
Power supply: 12-24VAC/DC
Output: Relay contact
Easy sensitivity setting by open push method
Self-diagnosis function
Compact size (W77 x L30 x H44 mm)


Pressure Sensors

Pressure sensors are widely used in the air pressure mechanics for precise controlling of the equipment. Autonics high accuracy digital pressure sensors are available in 2 product types with 24 different options. Their compact sizes and optimized features offer the most precise control of air pressure systems and a variety of applications for various environments in the industry.
Pressure Sensor

We offer Pressure Sensor, having following features :

High accuracy digital pressure sensor.
High resolution: 1/1000
Air, Non-corrosive gas applicable.
Pressure type: Standard / Vacuum / Compound type.
Convertible pressure unit
Vacuum, Compound pressure: kgf/cm2, kPa, bar, psi, mmHg, mmH2O, inHg
Standard pressure: kPa, kgf/cm2 , bar, psi.
Pressure Range: up to 1 MPa / up to10 bar
Output: NPN / PNP open collector
Analogue Output: 1 – 5 VDC
Various output modes: Hysteresis, Automatic sensitivity setting, Window comparative mode, etc
Built-in overcurrent protection circuit, reverse power polarity protection circuit
Zero point adjustment function
Peak and Bottom hold display
Pressure Port: Rc 1/8, NPT1/8, M5
Cable: Normal / Connector type


Area Sensors

The area sensor is the easy to use non-safety light screen for general purposes using multi light beams for the detection of the objects moving in the specified areas.Autonics area sensors, thin, small sized and compact design, offer more reliable sensing solutions equipped with long sensing distance, more advanced and various easy-to-use functions at the most reasonable price. Autonics picking sensors, kind of the area sensor products, is ideal for small part detection and assembly applications.
Area Sensor (Light Curtain)

The basic Area Sensor is comprised of a self-contained infrared transmitter and a corresponding receiver. The receiver incorporates status indicators.

Long Sensing Distance: up to 7 m
Optical Axis Pitch: 20 / 40 mm
Sensing Height: 120 -940 mm
Output: NPN/PNP open collector
Operation mode: Light ON (BW series), Light ON / Dark ON (BWP series)
Reverse polarity protection
Body Material: Aluminum / Plastic
Mutual Interference Prevention Function
Short Circuit Protection
IP65 Protection



Power Controllers

We are leading Supplier & Manufacturer for the Power Controllers which also includes Power Controller Equipments since 2007
Power Controller Equipments

Autonics also provides wide range of Power Controller Equipments to support and protect various IA devices for higher safety and productivity.

Various and simple input specification

4-20mADC, 1-5VDC, External 24VDC
External VR(1k)
External contact(ON/OF)


Various Function


Out ADJ(Limit the output) function
Soft Start function(Except for ON/OFF control type)
Out display function
50/60Hz automatic converting function

Various control type by mode SW

Phase control type
Cycle control type(Zero Cross)
ON/OFF control type(Zero Cross



PIDTemp. Controllers

Manufacturer and wholesaler of PID controller and temp. controllers.

PID Temperature Controller

TK4 Series Temp Controller
Super high-speed sampling cycle -50 ms
±0.3% display-accuracy.
It supports 13 types of thermocouple inputs, RTD (6 Types), 4 types of Analogue voltage input and 2 types of current input
Communication function supported : RS485 (Modbus RTU type)
PC parameter setting via USB cable and RS485 communication (Modbus RTU).It supports DAQMaster – PC loader program.
SSR output/Current output selectable
Heater burn-out alarm (C.T input)
Multi SV setting function (Max. 4) – selectable via digital input terminals
It is available in various sizes (48* 48), (72 *72), (48*96) and (96*96)

Single Display PID Temperature (TC4)
Single Display Temperature controlling with upgraded PID algorithm
Input: Thermo couples (J,K) and RTD (Pt-100)
Output: Relay and SSR Drive output embodied together (Parameter selecting type
Optional Event outputs: 2 relay alarm
100ms high speed sampling and 0.5% high accuracy control
Power supply: 100-240VAC 50/60Hz

Dual PID Auto Tuning Temperature Controller (TZN / TZ)
Multi – input (13 kinds of input): Thermo couples, RTD, Analog voltage / current
Available Various DIN Standard Sizes(48×48, 48×96, 96×48, 72×72, 96x96mm)
Main output : Relay, SSR Drive output, current(4~20mA) options
Sub output (Event outputs): Loop break Alarm, Sensor break Alarm, 7 kinds of alarm output and 4 types of Alarm selection option
2-type of PID control function (PID-Fast, PID-Slow)
2-step auto tuning control
Additional outputs: PV-transmission (4~20mA) and RS485 serial common Port
Display accuracy: F.S ± 0.3%
Power supply: 100-240VAC 50/60Hz or 24VAC / 24-48VDC options

Cooling / Defrost Temperature Controller (TC3YF)
Simple ON / OFF controller
Input: NTC (Thermistor) or RTD (Pt100)
Indication range: -40.0~99.9ºC (NTC), -99.9~99.9ºC (RTD)
Auto / Manual Defrost selection, Start-up delay of compressor, Re-operation delay and Operation delay of evaporation – fan
Input correction function
Control output: Relay
Power supply: 100-240VAC

Thumb-Wheel Type Temperature Controller (T3S / T4M / T3H / T4L)
Available Various Standard DIN Sizes
ON/OFF and Proportional Control type
Input: Thermo couples (J,K,R) and RTD (Pt-100)
$Main output: Relay, SSR, current(4~20mA) options
Display accuracy: F.S ± 0.5%
Power supply: 100-240VAC for T3S, 110/220VAC for T3H / T4M / T4L

Alarm, Sub Output Type Temperature (T3HS / T3HA / T4MA / T4LA)
Available in Various DIN Standard (48×96, 72×72, 96x96mm) Sizes
Thumb wheel type (Digital switch) set-keys
Input: Thermo couples (J,K,R) and RTD (Pt-100)
Main output: Relay, SSR, current(4~20mA) options
Alarm / SUB output: Relay
Display accuracy: F.S ± 0.5%
Power supply: 110/220VAC 50/60Hz

Dual Setting Temperature Controller (T4LP)
Control heater and cooler at once
ON/OFF and Proportional Control type selectable
Two thumb-wheel switches for two set-values
Input: Thermo couples (J, K, R) and RTD (Pt-100)
Alarm output: Relay (This can used as Cooler control in Dual setting)
Display accuracy: F.S ± 0.5%



Sensor Controllers

We are leading Supplier & Manufacturer for the Sensor Controllers which also includes Sensor Controller since 2007
Sensor Controller

Sensor controller receives input from the sensor, transforms it into various forms of logic representation, and output it to relay

Multifuction Sensor Controller
12 kinds of various operation modes selected by DIP S/W
High speed input response
Flip-flop function is built in for level control
Multifunction type with Timer function
DIN rail mounting and mountable without the rail
Wide range of power supply(100-240VAC 50/60Hz)

Switch Mode Power Supply
We offer Switch Mode Power Supply (SMPS).
Switch Power

Specification- SPA series

Output voltage: 5VDC, 12VDC, 24VDC
Output power: 30W, 50W, 75W, 100W
Power supply: 100-240VAC, 100-120/200-240VAC
Frequency: 50/60Hz

DIN rail mounting type Switching Power Supply – SP Series

Compact size, High quality, Competitive price
Universal input power source
Able to drive various controllers
Built-in over current protection circuit


Signal Tower Lights

We are leading Supplier & Manufacturer for the Signal Tower Lights which also includes Signal Tower Lights & Tower Lights since 2007

Miniature 66mm signal light (ML Series)

66mm lens diameter
rotating, flickering and strobe models
stud or pole mounting
4 lens colors available
various operating voltages
incandescent or xenon bulb

Standard ø 86mm signal light (AS / AP Series)

ø 86mm lens diameter
stud mounting

Large ø 135mm rotating signal light (AVG Series)

ø 135mm lens diameter for easy viewing at long distance
large rotating mirror
available with or without internal buzzer
various operating voltages available
choice of red, yellow, green or blue lens
ideal for large machines, construction sites, parking systems, etc.

ø 86mm multi – stamp type rotating signal light (SL Series)

rotating, flickering model
3 lens colors available
various operating voltage

Rotating signal light with audible alarms (MSGS Series)

large dimension lens
one to five stack light models
uses 25w bulbs for easy viewing at long distance
three selectable audio sounds (melody, siren and two tone)
audio can be used by itself or with a light
5 lens colors available
4 operating voltages available

ø 56mm & ø 86mm tower light – programmable flickering mode (MT5c / MT5c Series)

ø56mm, ø86mm lens diameter prism-cut lenses for superior light distribution
programmable flickering mode by using jumpers for each stack
one to five stack light models, 3 mounting styles are available
separate buzzer stack available
3 operating voltages available

Steady function tower light (MT4b / MT5b / MT8b Series)

ø 45mm, ø 56mm, ø 86mm lens diameter with prism-cut lenses for superior light distribution
4 mounting styles available
one to five stack models
inexpensive price

ø 45mm, ø 56mm tower light (PS / PL, PR / PO Series)

prism-cut lenses for superior light distribution
internally programmable for steady operation for each light
4 operating voltage available

ø 25mm / ø 45mm / ø56mm led tower light (PAE / PME Series)

selectable base, pole or wall bracket mounting
steady and flashing models
5 stack light color available
various operating voltage available
led light provide long life and reliability
ø 56mm tower light (PTE Series)

LED modular components
Bright & even light distribution through prism-cut lenses
Fast & easy assembly with inter-locking construction
3 base body options
Optional 85dB Buzzer (fixed or adjustable volume)
NEMA 4x / IP65 rated
RoHS approval



Rotary Encoders

By converting shaft rotation into electronic pulses, encoders are used to electronically monitor the position of a rotating shaft. The encoder’s output pulses are counted and evaluated by a control unit to determine machine position and velocity, which provides exceptional accuracy and flexibility when controlling motion. The high mechanical and electronic operating speeds associated with optical encoders increase system speeds and accuracy, decrease cycle times, and boost overall productivity in the manufacturing environment. Autonics rotary encoders of various sizes and types offer high-quality and precise measuring of the operating position and speed of the rotating shaft, etc. for more precise control of the objects.
Multiturn Absolute Rotary Encoders

Rotary Encoder
EPM Series Multiturn Absolute Encoder
ø50mm compact body with shaft dia 8 mm.
23bit high resolution i.e the single turn with 10 bit (1024 division) resolution and multiturn with 13 bit – 8192 revolution possible
The output code is binary code with control with options of Line driver ( SSI )and NPN open collector output possible (Parallel interface ).
Easy zero adjustment using single-turn / multi-turn data separate reset function
Maximizing users convenience with latch, clear, overflow alarm function
CW / CCW direction setting possible with direction function
Parallel data / Serial data transmission type
Protection structure IP64

EP series Absolute Type Encoder

external diameter: 50 / 60 mm shaft type
shaft diameter: 8 / 10 mm
resolution: up to 1024 division (max. 10 bits)
output code: bcd / binary / gray code.
control output: pnp / npn open collector.
power supply: 5 vdc / 12-24vdc
Incremental Type Encoder

Suitable for measuring angle, position, revolution, acceleration and distance
Shaft type, hollow shaft type, wheel type, side mounting type, manual pulse generator (handle type)
Outer diameter: 20 / 30 /40 / 50 / 60 / 68 / 80 / 100 mm
Shaft diameter: 2 / 4 / 6 / 8 / 10 / 12 / 15 mm
Hollow diameter: 2 / 2. 5 / 3/ 6 / 8 / 10 / 12 / 20 / 30 / 32 / 35 mm
Power supply: 5 vdc / 12-24vdc.
Number of output channels: 2,3,4,6. (a, b, z, -a, -b, -z)
Output: totem pole / npn open collector / voltage output / line driver output.
Resolution: up to 10,000 p/r
Cable: normal / connector type / cable outgoing connector type


Digital Counters

Counters & timers are the basic tools widely used in automation process of various industries. Autonics offers the wide range of industrial counters and timers, designed, manufactured and tested to meet the most demanding worldwide standards and ratings. They also offer reliable design, quick replacements, panel space-saving and solutions that offer increased functionality, flexibility and performance.
Digital Measure Counter

Miniature LCD counter, Indication only (LA8N)

DIN 48 x 24mm panel mountable
Only Up count
LCD 8-digit Display
Universal Input or No-voltage input models
Input speed (DIP-switch) selectable (1, 30, 1Khz)
IP-66 protection structure
Front panel Reset and terminal Reset available
Reset Key locking feature
Internal Lithium-Battery power

Programmable Counter (CT series)

Various mounting options (W48 x H48mm, W72 x H36mm, W72 x H72mm)
Decimal point and Pre-scalable programmable
Max. counting speed: 10KHz
Selectable voltage input (PNP) or No-voltage (NPN)
Up, Down, Up-Down count selectable
Multi-functional (counter / timer)
ON / OFF time settable in flicker mode (various output modes)
Batch count, Double pre-set value options available in selective models
Front panel Reset and terminal Reset options
Relay or Solid-state output options / Touch Key locking feature
Power supply: 100-240VAC, 24VAC, 24-60VDC

Up/Down Counter (FX series)

Various mounting options (W48 x H48mm, W72 x H36mm, W72 x H72mm, W144 x H72mm)
Indicator, Single preset, Double preset models
Thumb-wheel type switches for “Preset” setting
Up, Down, Up-Down count mode Selectable
Input speed programmable: Max. 5KHz
Relay and Solid-state outputs
Power supply: 100-240VAC, 12-24VAC/DC

8-Pin Plug Type Counter (FS series)

48x48mm mounting size
Indicator, Single preset models
8-pin plug type. (can be mounted in panel or in DIN rail)
Thumb-wheel type switch for “Preset” setting
Up and Down count mode Selectable
Input: No-voltage input
Input speed Selectable: Max. 5Khz
Relay output. Output time definable

8-Digit Up / Down / Up-Down Counter (F / L series)

DIN W72 x H72mm, W144 x H72mm
8 digit LED display
Up / Down / Up-Down count mode Selectable
Input: Voltage and No-voltage input
Relay and Solid state outputs. Output time definable



Display Units

We are leading Supplier & Manufacturer for the Display units which also includes Panel Mounting Type & 7 Segment LED Display Type since 2007
Panel Mounting Type

Features of Panel Mounting Type:

Size: W96 x H48 mm
Power: 12-24 VDC 110/220 VAC optional
Selectable 4 input types
Selectable 5 digit or 4 digit with minus sign
Selectable positive or negative input logic
Selectable decimal point

7 Segment LED Display Type

Features of Red or green 7 Segment LED Display (W11 x H20 mm) :

Power: 12-24 VDC
Selectable decimal or hexa-decimal
Selectable serial or parallel data input
Can connect as multi-stages

16 Segment LED Display Type

16 Segment LED Display Type
Features of 16 Segment LED Display Type:

Red or green 16 segment display unit (W11 x H20)
Display 60 kinds of characters


Electronic Timers
Digital Timers

LCD Type Weekly / Yearly Timer (LE7M-2)
Weekly / Yearly control mode
ON/OFF mode, Cycle mode, Pulse mode programmable
DIN W72 × H72mm
Number of Steps: Weekly mode – 48 Steps, Yearly mode – 24 Steps
Settable yearly holidays up to 12 days (H.01 ~ H.12)
Season switching mode
Able to check, modify, delete set individual unit of program
Individual 2 types of control outputs -SPDT
Extended control contact capacity (250VAC, 10A, Resistive load)
DIN Rail mounting for base plate
Power supply : 100-240VAC(50/60Hz)

LCD Type Weekly / Yearly Timer (LE365S-41)
DIN W48 × H48mm
Single control output – SPDT
Extended control contact capacity (250VAC, 15A, Resistive load)
Power supply: 100-240VAC(50/60Hz)

LCD Miniature Indication Timer (LE8N)
LCD 8-digit Display (only indicator)
6 various range of time mode selectable by TS1, TS2 and by selector switch-2

Digital LCD Timer (LE3S)
DIN W48 x H48mm
Bar graph Display. (LCD display)
Easy to switch Up/Down mode
10 programmable output modes and Timing ranges
Graphic Output status display
Multi timer (10 output modes, 0.01 sec to 999Hr)
Simple function selection by front panel Digital switches
Power supply: 100~240VAC / 24-240DC
8-pin plug type. 2 type of bases (panel or DIN rail mountable)

Digital LCD Timer (LE4S)
High visibility LCD display with back light
Easy functional settings and output time settings
Built-in battery saves memory protection and set values
Multi timer (10 or 7 output modes, 0.01sec to 9999Hour)
Simple function selection by front Soft touch setting type
Power supply: 100-240VAC / 24-240VDC
8-pin plug type, 2 type of bases (Panel or DIN rail mountable)

8-Pin Plug Digital Timer (FS4E)
FS4E: single preset with 4-digit
FS5EI: indicator type with 5-digit display
Thumb-wheel switch type setting in pre-set type
Front panel and Terminal reset available
Output operation mode selection in Pre-set type
Up/Down mode, Time range mode, Memory retention selectable by DIP switches
8 output mode and 8 time range options
Output time selectable from front panel Trimmer key
Power supply: 100~240VAC or 24-240VDC options




HMI Graphic Panel

We are leading Supplier & Manufacturer for the HMI Graphic Panel which also includes Graphic Display Panel since 2007
Graphic Display Panel

Features of Graphic Display Panel :

Display max. 400 characters
Able to save max. 500 pages of user screen
Easy S / W upgrade at website (firmware, GP Editor, protocol, language and font)
PLC port allows to monitor and control the variables of additionally connected controllers
Various language supported : Korean, English, Japanese, Chinese, Russian (Other languages will be added by firmware)
Multi font supported : Various bitmap fonts supported (selectable)
Easy to connect external units using multi communication ports (two RS232C ports or RS232C/RS422)
Device monitoring function makes possible to monitor controller’s variable without graphic drawing data
Various external units connectable : PLC, printer, barcode reader and other controllers with no display parts
Various data display is available using diverse tags



Digital Panel Meters

Engaged in manufacturing and supplying of digital panel meter, electronic Digital Panel Meters, portable Digital Panel Meters, Digital Scaling Meters and digital process meters. Also deals in temperature transducers and humidity transducers.
Digital Panel Meter

Loop Powered Digital Scaling Meter (M4NS / M4YS)

DIN W48 x H24 mm (M4NS), W72 x H36 mm (M4YS)
Measurement input: 4-20mADC
Max. display range: -1999 to 9999
Resolution: 1/12,000
Prescale function
Decimal point change function
Selectable display cycle: 0.5sec / 1sec / 2sec / 3sec / 4sec / 5sec
Peak display value monitoring function
Hi / Low limit input correction
Built in Battery

Graphic Panel Meter for Mosaic Panel (M4V)

W75 x H25mm
Various input: 0-2VDC, 0-10VDC, 1-5VDC, 0-1mADC, 4-20mADC
Max. display range: -999 to 9999
7-segment red LED display
Prescale function (High/Low scale setting)
Error display function or self diagnosis function

Super Version Digital Multi Panel Meter (MT4N / MT4Y / MT4W)

W48 x H24mm, W72 x H36mm, W96 x H48mm
Max. measuring input: 500VDC, 500VAC, 5ADC, 5AAC
AC frequency measurement function: 0.1 ~ 9999Hz
Selectable RMS & AVR value for measuring AC input
Various output: RS-485, Relay, 4-20mADC, BCD, NPN / PNP open collector
Display correction function
Power supply: 12-24VDC/AC (MT4N),100-240VAC/12-24VDC (MT4Y, MT4W)



Steping Motor Driver Controllers

We are leading Supplier & Manufacturer for the Steping Motor Driver Controllers which also includes Steping Motor Driver Controllers since 2007

5-Phase Stepping Motor – Shaft Type

24mm / 42mm / 60mm / 85mm frame size
Standard & High speed type ( 60mm, 80mm)
Max. holding torque: Up to 63 Kgf ·cm
Pentagon (5wires) / Standard connection (10wires)
Available single shaft and dual shaft
CE mark

5-Phase Stepping Motor – Hollow Shaft Type

42mm / 60mm / 85mm frame size
Assembling Directly Ball-screw, TM-screw, etc
Reduced noise & vibration by elimination of coupling

5-Phase Stepping Motor – Brake Type

Non-polar type Brake
Electromagnetic brake type(24VDC excitation)
60mm / 85mm frame size

5-Phase Stepping Motor – Geared Type

1:5, 1:7.2, 1:10 gear ratio (AK-G series)
60mm / 85mm frame size
Max. holding torque: Up to 200 Kgf ·cm
CE mark (AK-G)

5-Phase Stepping Motor Drivers (MD5-HD14)

Input power: 20-35VDC / Drive current: Max. 1.4A/phase
Bipolar constant current Pentagon drive
Micro step driver method: Up to 250 divisions (0.00288o ~ 0.72 o/1 Step)
CW and CCW rotation and holding off motor excitation

5-Phase Stepping Motor Drivers (MD5-HF14)

Input power: 100-240 VAC / Drive current: Max. 1.4A/phase
Bipolar constant current Pentagon driver
Micro step drive method: Up to 250 divisions (0.00288o ~ 0.72 o/1 Step)

5-Phase Stepping Motor Drivers (MD5-HF28)

Input power: 20-35VDC / Drive current: Max. 2.8A/phase



Temperature Humidity Transducers
Manufacturer and exporter of different humidity, temperature and pressure indicators and current transducers.
Temperature And Humidity Transducers

Temperature And Humidity Transducers :
Built-in Temperature / Humidity sensor
Various output: 4-20mADC, 1-5VDC, RS485 (MODBUS RTU)
Measuring range: -19.9 ~ 60 ºC / 0.0 ~ 99.9 %RH
7 segments LED display
Indoor / Duct mounting / Wall mounting type
7 segment LED Display (Duct & Wall mounting type)



Electrical Accessory

We are offering Electrical Accessory to our clients. These products are available in various technical specifications and can be customized as per the needs clients. Appreciated for optimum performance, less maintenance, sturdy construction, corrosion & shock resistance and longer functional life. Clients can avail these products from us as per their needs at most economical price.

Authosied Dealer For Anchor Electricals

Innovation and Designing Excellence is what Anchor has been bringing straight to the home and business premises right from 1963. With several brands like Roma, Roma Allure, Rider and Penta, it has hallmarked its position straight to the heart of the nation. Its accessories range includes a wide variety of Door Bells, Spike Guards, Flexi cords, Plug Tops and Multi plugs.
The ability to bring a sense of security, quality and affordability drives Anchor to bring not just products but simplistic solutions that change for the better, suiting the customer’s requirements.

Please Visit website to view the products

Ave | Designer Plates
Vision | Viola | Woods | Allure | Roma | Rider
Penta | XL
OTHER DEVICESAccessories | Boxes | Pop up boxes

Tube Light

We are indulged in offering Tube Light to our clients. These lights are available in many designs and shapes and can be customized as well as per the requirement provided by the client. We make use of high quality raw material and latest technology. Avail from us these products at industrial leading rates.

MCCB Switch

We are Authorised R.O For Schneider Electric India Pvt. Ltd.

MCB Switch

We have an exclusive range of MCB Switch offering to our clients. Our offered MCB Switch is available in various specifications to meet the requirements of our clients at competitive prices. We are Authorised R.O For Schneider Electric India Pvt. Ltd.

Flexible Cable

We are offering Flexible Cable to our clients. Widely used for electric power supply, our Flexible Cable are available in different lengths, diameters and thickness. We are Authorised Deler for RR Kabel.

We, Dhanlaxmi Electricals would like to introduce ourselves as leading Authorized distributors of AUTONICS,
Industrial Automation products such as Sensors, Controllers and Motion devices.

Autonics Automation India Pvt. Ltd is a wholly owned Indian subsidiary of Autonics Corporation S.Korea.

The trust of Autonics India will be on fullest satisfaction of customers towards cost effective sales and servicing solutions to OEMs and end users. Autonics India have dedicated distributor network throughout India, and we are one of them.
We take this opportunity once again to introduce our complete range.
Major Products:
SENSORS: Inductive / Capacitive Proximity Sensors, Through Beam / Diffuse / Retro Reflective Photo Sensors, Light Curtain, Auto door Sensors, Fiber Optic Sensors, Incremental / Absolute Rotary Encoders, Digital Pressure Sensors, Temperature / Humidity Transmitters.
CONTROLLERS: Counters, Timers, PID Temperature Controllers, Power Controllers, Tacho/Speed/Pulse/Rate Meters, Digital Panel Meters, SMPS, Display Units, Sensor Controllers, Serial Converter RS232/RS485, Device Net, HMI, Signal Converters, Recorders, Thyristors, Transmitters, Indicators.
STEPPER MOTORS/DRIVRS/MOTION CONTROLLERS: Stepper Motors/ Stepper Motor Drives / Motion Controllers.
LIGHTS: Tower lights, Warning lights, Signal Lights.
CONTROL SWITCHES: Push Button Switches, Selector Switches, Emergency Switches, Switch Accessories, Digital Switches, Buzzers, Interface Terminals, Pilot Lamps, Sockets.





6. SSR

Motion Devices


Indication Lights


Process Automation




Leave a Comment

Your email address will not be published.